|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-17-2019, 08:42 AM | #1 |
Junior Member
Join Date: Nov 2017
Posts: 11
|
Data plate rivet holes don't line up
Just purchased a data plate for the firewall on my late 31 Coupe. The rivet holes in the firewall don't line up with the holes in the repro plate. Holes are off by about 1/16" My firewall is not a re-stamp. Anyone run into this?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|