12-22-2022, 11:26 PM | #1 |
Senior Member
Join Date: Aug 2014
Location: west palm beach florida
Posts: 180
|
fender felt?
hello again, does anyone on here know what the correct name for the felt strips that get stapled to the tops of the inner front fenders and the front hood brace? where can I find it? thanx,tom
|
12-22-2022, 11:40 PM | #2 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,261
|
Re: fender felt?
It helps to know what you’re working on.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-23-2022, 03:59 AM | #3 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,115
|
Re: fender felt?
Looks like a '48 Merc! Coop |
12-23-2022, 06:44 PM | #4 |
Senior Member
Join Date: Aug 2014
Location: west palm beach florida
Posts: 180
|
Re: fender felt?
yes, it is a'48 merc. 8 yrs. and counting. saving a rust belt car that should have been crushed.lol
|
12-24-2022, 12:27 PM | #5 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: fender felt?
Sounds like you are talking about frame webbing. You can buy it by the roll and you would use the 1" stuff for the inner fender panels.
|
12-24-2022, 08:14 PM | #6 |
Senior Member
Join Date: Aug 2014
Location: west palm beach florida
Posts: 180
|
Re: fender felt?
Sponsored Links (Register now to hide all advertisements)
|
12-24-2022, 09:18 PM | #7 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,950
|
Re: fender felt?
Check with these folks:
https://www.restorationspecialties.com/ |
12-25-2022, 01:39 PM | #8 |
Senior Member
Join Date: Aug 2010
Location: East Boothbay, Maine
Posts: 279
|
Re: fender felt?
If you want narrower than 1" look at Model A running board 3/4" x 1/16" anti-squeak webbing.
|
12-25-2022, 08:24 PM | #9 |
Senior Member
Join Date: May 2010
Location: Southeastern, MA
Posts: 434
|
Re: fender felt?
Originally Ford used Pyroxyline Cloth for this that was able to be painted body color. Roy Nacewicz carried this product, his business has been purchased by Mike Driscoll at Third generation Auto Parts, I would check with him to see of it is still available.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|