|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-07-2021, 09:29 AM | #1 |
Junior Member
Join Date: Dec 2020
Location: Colorado
Posts: 10
|
Rear axle shaft loose, banjo 38
I have a 38’ PU and wasn’t sure on thoughts to where to start with fixing this- the right rear axle shaft has 1/4” of free play. Looking at the manuals I’m thinking I need a new gear race and can get to it by removing the backing plate- Thanks
|
01-07-2021, 09:37 AM | #2 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Rear axle shaft loose, banjo 38
With the drum ON and tightened is there any movement??
I believe what movement you have now is normal as there's nothing supporting the axle withe the drum removed. Paul in CT |
Sponsored Links (Register now to hide all advertisements) |
|
01-07-2021, 10:06 AM | #3 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Rear axle shaft loose, banjo 38
The early Ford banjo rear has whats known as floating axles. The tapered end of the axle in your picture requires the drum assembly with roller bearing to be in place for its stability.
Also, the threaded end of the axle in your picture looks like it could be heavily mushroomed.... unless thats just a distortion in the picture.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
01-07-2021, 10:43 AM | #4 |
Junior Member
Join Date: Dec 2020
Location: Colorado
Posts: 10
|
Re: Rear axle shaft loose, banjo 38
Thank you- I’ll put the hub on and check. I also think it’s just the picture.
|
01-07-2021, 10:44 AM | #5 |
Junior Member
Join Date: Dec 2020
Location: Colorado
Posts: 10
|
Re: Rear axle shaft loose, banjo 38
|
01-07-2021, 03:29 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Rear axle shaft loose, banjo 38
Sponsored Links (Register now to hide all advertisements)
|
01-07-2021, 08:04 PM | #7 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,067
|
Re: Rear axle shaft loose, banjo 38
You need to use about 200 Ft lbs on the big nut on the end of the axle. I know this makes ones rear-end pucker as you're struggling to put that much torque on it . . . but this high torque number is what ensures that the hub-to-axle tapered surfaces can do their job.
The key is NOT what takes the load (or it shouldn't) - it is the tight fitting tapered surfaces that take the load . . . and they only work as they should with the correct torque figures. Hopefully the tapered ends of your axles are in good shape - inspect them carefully for cracks around the key-way . . . many get damaged from improper installation or abuse over the years. Hopefully the bearing surfaces on your axle bells are good - in many cases they get pitting over the years . . . which is another problem. Also, torque it once, drive it around a bit (making sure you go around some corners), then come back and re-check the torque values. |
08-29-2022, 06:10 PM | #8 |
Senior Member
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,817
|
Re: Rear axle shaft loose, banjo 38
"Hopefully the bearing surfaces on your axle bells are good - in many cases they get pitting over the years . . . which is another problem."
I am redoing the brakes on my 39 sedan and have noticed 1) the end play (side to side) of the rear axle. From what I have seen here on the Barn, that is normal. Whew. 2) one of my bearing surfaces is scored and pitted a bit. From what Vern Tardel says, they are often usable in that condition. His differential books shows a photo that is similar to my situation. The question is when is it too bad to just reassemble and go?
__________________
1924 Model T Coupe 1928 Model A Roadster 1930 Model A Town Sedan 1939 Deluxe Fordor 1945 pickup 1951 Custom convertible |
08-30-2022, 12:51 AM | #9 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: Rear axle shaft loose, banjo 38
This thread is a year 1/2 old.I would think the issue is resolved.Why not start a new thread with your question?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|