|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-09-2012, 11:13 PM | #1 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
Parts '36 and '34?
A neighbor said he had some parts laying around that I might be able to use. I'm not sure what they are off of or go on. He thought '36 or '34. Pictures below I hope. Maybe we can find them a home.
Thanks |
11-09-2012, 11:19 PM | #2 |
Senior Member
Join Date: May 2010
Location: Kaufman, TX
Posts: 822
|
Re: Parts '36 and '34?
Spare cover appears to be 36, wheels on a
33-34's are 17", 35's are 16". 36 wheels have the wide 5 pattern. Don't recognize the other parts. |
Sponsored Links (Register now to hide all advertisements) |
|
11-09-2012, 11:38 PM | #3 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
Re: Parts '36 and '34?
Thanks gives me a place to start. I'll measure the wheels
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
11-10-2012, 01:33 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 1,640
|
Re: Parts '36 and '34?
The third picture shows headlight stands for 1938-39 Ford trucks and also think they were used on COE's for a year or two.
|
11-10-2012, 09:51 AM | #5 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
Re: Parts '36 and '34?
Thanks Randy,
I know the picture's not good, but they are way smaller than the stands on my 38 and 39 pickups. Maybe earlier?
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
11-11-2012, 11:36 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 1,640
|
Re: Parts '36 and '34?
Sponsored Links (Register now to hide all advertisements)
|
11-12-2012, 12:22 AM | #7 |
Senior Member
Join Date: May 2010
Location: Windsor California
Posts: 492
|
Re: Parts '36 and '34?
Wheels look to be 35 Car . Spare tire cover is 36 Deluxe .
|
11-12-2012, 11:36 AM | #8 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
Re: Parts '36 and '34?
Thanks for reply - I'll take a look when it warms up a little. Was about 15 deg last night and warming up slow!
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
11-12-2012, 01:11 PM | #9 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
Re: Parts '36 and '34?
Randy, you are totally correct. The stands I pictured are off my 38 or 39 PU's. Went out and compaired them (second photo below, but you already knew they were the same).
I had them confused with some in the first picture below. Funny how old age and dropping a project years ago makes me forget. The ones in the first photo below are the ones I'm wondering about. Guess they might be for some sort of tail light too. Sorry for any trouble!
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
11-12-2012, 03:05 PM | #10 |
Senior Member
Join Date: May 2010
Posts: 1,640
|
Re: Parts '36 and '34?
Pretty sure the ones you're wondering about, in the second set of pictures, are for 1935 Ford passenger cars.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|