Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-05-2020, 11:39 AM   #1
Senior Member
Join Date: Jun 2010
Location: DFW Area
Posts: 149
Default Spark Question

I am sure a lot of you will go - here we go again but I can't find specifically what my problem is so here we go... no spark....

1929 Coupe - 6 volt positive ground...

Purchase new:
Ignition switch
Ignition cable
"Modern upper distributor plate with modern points and condenser"

installed all - no spark

I have check ignition switch, coil (positive and negative) and distributor plate and all show to have power.

I checked the wire coming out the coil and i show now power (not sure i should) and I also checked the coil wire coming out of the distributor and no power (no sire it should show any)

no be be honest when I put the new distributor plate in i DID NOT reset my timing pin etc.....

Is that the problem related to no spark?
txmike is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 11:53 AM.