Go Back   The Ford Barn > The Swap Meet > Wanted > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-08-2011, 11:56 AM   #1
tamara
Junior Member
 
Join Date: Feb 2011
Posts: 1
Smile WANTED: Choke Linkage

City: Candia
State: NH

I am trying to find a choke linkage for a pair of Holley 94's to hook both carb chokes together for my dads 1949 Ford coupe.

Thank you!

Tamara
tamara is offline   Reply With Quote
Old 02-08-2011, 12:19 PM   #2
ken ct
BANNED
 
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
Default Re: WANTED: Choke Linkage

Pretty much un workable to do. Just use 1 choke working on the rear carb. Thats all you need. Most people over choke a flathead and flood them anyhow. ken ct.
ken ct is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-09-2011, 10:35 AM   #3
ken ct
BANNED
 
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
Default Re: WANTED: Choke Linkage

Sponsored Links (Register now to hide all advertisements)
If you have to have 2 oper. chokes,you might be able to do it this way.Seeing you have cable choke levers,you could buy a pc. of heavy piano wire approx diam of the orig. cable[inner pc] and double up on the ends that go into the rear carb lever.Even if you have to enlarge the wire hole slightly on the rear one then run the added wire pc for the front carb to the front lever. It might work.Worth a try.Other wise i wouldn't wory about only having 1 choked carb.Wire tie the non oper. choke so it dosen't close on you. ken ct.
ken ct is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:52 AM.