|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-04-2016, 09:53 PM | #1 |
Member
Join Date: Feb 2011
Location: SEMass
Posts: 46
|
seat adjuster…but from what?
Gents-
This came off the bottom of an alleged '32 sedan bucket seat. I've enclosed pics, but I haven't seen this in any catalogs. Im using the seats in a '30 Coupe, but want to stay true to the correct mounting hardware. I want to say I've seen the adjuster once around here, but can't seem to find it again. Any help out there? Thanks! |
05-04-2016, 10:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: seat adjuster…but from what?
I have no idea what that's from, but I'm sure it's not a 32 seat adjuster from a front seat on a tudor sedan.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-04-2016, 10:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: seat adjuster…but from what?
Not even close to that of a '32 seat (any '32 seat).
|
05-05-2016, 02:10 AM | #4 |
Senior Member
Join Date: Feb 2014
Location: Harare Zimbabwe
Posts: 160
|
Re: seat adjuster…but from what?
Sponsored Links (Register now to hide all advertisements)
I had 1935 Auburn's, both 2 door sedan and 4 door sedan. The seat adjusters on the 2 door were missing, but it had those 4 dome shaped pieces attached to the back of the seat base. The 4 door sedans adjusting handle looked identical to the one on these mechanisms. I think what you have are the slides and parts for the Auburn 2 door sedan probably from 1934 to 1936. I suggest you look for "CURTI" on the AACA forums site for Auburn Cord Deusenberg and ask him if I'm right. Best regards Viv. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|