Go Back   The Ford Barn > The Swap Meet > Wanted > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-03-2011, 07:30 AM   #1
BillyBobsSpeedShop
Member
 
Join Date: May 2010
Posts: 88
Default column drop parts

City: boonville
State: nc

I have a 1939 or 1940 column drop and Im missing the lock leaver and parts. I have a pictured attached to the forum with what I have. If anyone hase parts for this please let me know. Thanks

Billy

BillyBobsSpeedShop is offline   Reply With Quote
Old 10-11-2011, 01:27 PM   #2
BillyBobsSpeedShop
Member
 
Join Date: May 2010
Posts: 88
Default Re: column drop parts

Btt
BillyBobsSpeedShop is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-11-2011, 04:49 PM   #3
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,768
Default Re: column drop parts

Billy, I have most everything missing but the actual lever. I am also missing a small spring and a ball that go in the detent. Also two screws that hold the electrical stuff to the back of the part. All should be easy enough to get at a hardwear store except the lever. I can spec the stuff out. The cap that goes on the end of the plunger needs replating and the plunger assy has some buggered splines but all is doable. The plunger assy could use a pin replaced also. $30 shipped
Andy is offline   Reply With Quote
Old 10-15-2011, 07:22 PM   #4
OLD...BILL
Senior Member
 
OLD...BILL's Avatar
 
Join Date: May 2010
Location: Northern California,coast
Posts: 552
Default Re: column drop parts

Sponsored Links (Register now to hide all advertisements)
BILLIE-BOB; There is a world of difference, between 39 / 40 column drop. the 39 is soild in the center,is where the flag swithch is .... now the 40 is open in the center,where the shift shaft goes through for the column shift trans your ( three on the tree ) thingie, sounds like Andy has what you need, I hope..... now I need a bumper brace for 39 deluxe, frount, short center one, comes out from the frame and curls toward the center? any help. thanks ...OLD....BILL
OLD...BILL is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:47 PM.