|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-27-2020, 09:15 PM | #1 |
Senior Member
Join Date: Sep 2020
Location: Syracuse, NY
Posts: 173
|
Loose Vacuum Line Solution
I was so excited when I discovered plugging in the line pictured in the center nut that my wiper actually worked(thankfully after getting some estimates for a wiper motor rebuild). The problem is how do I get it to stay? I tried loosening the nut, pressing it in, then tightening it. I didn't want to over tighten it and shear anything, and after a couple rides it popped out again. Is there something I need to do to keep it from popping out?
|
11-27-2020, 09:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,025
|
Re: Loose Vacuum Line Solution
Should be a ferrule on the tube that compresses when the nut is tightened
|
Sponsored Links (Register now to hide all advertisements) |
|
11-28-2020, 12:23 AM | #3 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Loose Vacuum Line Solution
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|