Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-26-2020, 09:29 AM   #1
russcc
Senior Member
 
Join Date: May 2010
Posts: 2,485
Default Pressurizing the oil system before initial startup

Over the years I have seen various posts on pre-pressurizing the oil system in the flatmotor before initial startup. The 59L has a 95% full flow oil pressure system, and I would likely tap into the output fitting at the block. I have a mechanical oil pressure gauge. Any suggestions on pressurizing methods. Thank you Fordbarners.
russcc is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:43 AM.