The Ford Barn

Mike Mayer · 05-05-2017, 05:42 PM

I recently acquired a merc. engine from 1950 the block was junk but I have all the internal parts . I need to sell the parts. Is there anything I need to do to the crank or cam to prepare them to sell?

40 Deluxe · 05-05-2017, 05:53 PM

Clean the parts and take good pictures, with details of the crank journals and cam lobes. Check the front counterweight on the crank for numbers stamped to indicate undersize if it's been reground or there may be paint markings. ike the journals if possible, too.

Mike Mayer · 05-06-2017, 08:21 AM

Sponsored Links (Register now to hide all advertisements)

Thank you I have a place to start

05-05-2017, 05:42 PM	#1
Mike Mayer Senior Member Join Date: Aug 2010 Posts: 108	merc I recently acquired a merc. engine from 1950 the block was junk but I have all the internal parts . I need to sell the parts. Is there anything I need to do to the crank or cam to prepare them to sell?

05-05-2017, 05:53 PM	#2
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,778	Re: merc Clean the parts and take good pictures, with details of the crank journals and cam lobes. Check the front counterweight on the crank for numbers stamped to indicate undersize if it's been reground or there may be paint markings. ike the journals if possible, too.

05-06-2017, 08:21 AM	#3
Mike Mayer Senior Member Join Date: Aug 2010 Posts: 108	Re: merc Sponsored Links (Register now to hide all advertisements) Thank you I have a place to start