|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-27-2005, 04:16 AM | #1 |
Guest
Posts: n/a
|
??'s about c4 in a 36 Tudor
I am building a 36 Tudor for the wife. I want to keep the 85hp flatty but she needs an automatic. I know that i can get an adapter from flat-o and convert to the open shaft. My question is can that all be done with the original framework or will I need to change the center cross brace? Any and all help/suggestions are greatly appreciated. This is my first "project" Thanks |
03-27-2005, 03:07 PM | #2 |
Guest
Posts: n/a
|
Re: ??'s about c4 in a 36 Tudor
call flato gene benson will tell what all you need. bills1935 |
Sponsored Links (Register now to hide all advertisements) |
|
03-27-2005, 04:35 PM | #3 |
Guest
Posts: n/a
|
Re: ??'s about c4 in a 36 Tudor
Sponsored Links (Register now to hide all advertisements)
his # is 503-364-2934. he has the parts to mount the rear radius rods when using an open drive line. call him before thur, as he will be headding for the portland swap meet that day. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|