Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-22-2021, 11:26 PM   #1
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Mystery Engine Knock

Been chasing an engine knock for a few weeks in my roadster. This is on a newly rebuilt engine with almost 1000 miles on it. Along with the knock a cylinder is misfiring (either 3 or 4, they both change a bit when shorting out). It is definitely coming from the back of the engine. The knock is not consistent in pattern and is quite loud. It is definitely at camshaft speed and in the top end.

Here is what I have checked:
Timing gear - no broken teeth, nice and tight;, plunger spring good
Compression test - all four cylinders are putting out over 60 pounds
Oil pan - taken off and crankcase inspected, nothing
Valves - valve cover taken off, clearances checked, no stuck valves (at least at time)
Just for kicks I put some marvel mystery oil in the gas to see if anything would happen, no change.


Me and many other guys have not been able to pinpoint where this noise is coming from' just on the top end in the back of the engine. The thing that seems to be making everybidy scratch their heads is that it is really loud at idle but once you increase the throttle it quiets and turns more into a rattle.

Anybody have any ideas as to what it is? We are all stumped!
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-22-2021, 11:50 PM   #2
Bob Johnson
Senior Member
 
Bob Johnson's Avatar
 
Join Date: May 2010
Location: California
Posts: 977
Default Re: Mystery Engine Knock

How about a rod hitting the dip tray?
Bob Johnson is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-22-2021, 11:57 PM   #3
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Mystery Engine Knock

Quote:
Originally Posted by Bob Johnson View Post
How about a rod hitting the dip tray?
No witness marks on the dip tray and the knock is not at crankshaft speed.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-23-2021, 01:30 AM   #4
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,330
Default Re: Mystery Engine Knock

What about a visual inspection of the valves and piston heads on 3 and 4 via the spark plug holes?
alexiskai is offline   Reply With Quote
Old 06-23-2021, 04:52 AM   #5
Werner
Senior Member
 
Werner's Avatar
 
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,151
Default Re: Mystery Engine Knock

CHRS...,


Is it conceivable that there is something loose in the clutch bell housing?
__________________
Beste Gruesse aus Deutschland,
Werner


Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
Werner is offline   Reply With Quote
Old 06-23-2021, 05:22 AM   #6
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Mystery Engine Knock

Sponsored Links (Register now to hide all advertisements)
Does it seem like it could be coming from the starter ? Maybe a problem like Fred had.
Patrick L. is offline   Reply With Quote
Old 06-23-2021, 07:32 AM   #7
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,819
Default Re: Mystery Engine Knock

The book Model A Ford Mechanics Handbook, Vol. I has a Troubleshooting Chart 4.6, Engine Noises on page 4-8.

Number 2 is Valve Noise which can be caused by loose valve stem or guide or stuck valve. The book recommends trying to squirt oil into the carburetor while the engine is running to try and loosen a stuck valve. I know you have looked at that but it could be that a valve is sluggish and not completely stuck so that it only happens when the engine is running.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 06-23-2021, 07:56 AM   #8
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Mystery Engine Knock

I have yet to look at the top of the valves, probably should pull out my small little inspection camera and look at that.

Is it possible that it could be from the bell housing? Seems weird that that would cause a misfire?

It is coming from the passenger side of the engine for sure.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-23-2021, 08:11 AM   #9
Marshall V. Daut
Senior Member
 
Join Date: Apr 2011
Location: Davenport, Iowa
Posts: 2,083
Default Re: Mystery Engine Knock

Check your "Private Messages" in the top right corner of this web page.
Marshall
Marshall V. Daut is offline   Reply With Quote
Old 06-23-2021, 08:41 AM   #10
Greg Jones
Senior Member
 
Greg Jones's Avatar
 
Join Date: Jul 2010
Location: Aiken, South Carolina
Posts: 695
Default Re: Mystery Engine Knock

Loose valve seat? I had that once, drove me crazy finding it.
Greg Jones is offline   Reply With Quote
Old 06-23-2021, 09:02 AM   #11
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,330
Default Re: Mystery Engine Knock

Quote:
Originally Posted by Greg Jones View Post
Loose valve seat? I had that once, drove me crazy finding it.
I just had that this winter. Didn't manifest as a knock, but did lead to odd symptoms.
alexiskai is offline   Reply With Quote
Old 06-23-2021, 10:03 AM   #12
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Mystery Engine Knock

I don't have valve seat inserts.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-23-2021, 12:33 PM   #13
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,819
Default Re: Mystery Engine Knock

Another possible source of a knock is a tight distributor shaft or the screw that secures the distributor being too tight. But I don't think that is your knock. If there is a miss associated with the knock than I would suspect a sluggish valve. This may not work but I would try squirting some PB Blaster for other solvent type oil into the carburetor while the engine is running at a good clip. Lead used to lubricate valves. You might try some lead substitute, available at the auto parts stores.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 06-23-2021, 05:56 PM   #14
Chuck Sea/Tac
Senior Member
 
Chuck Sea/Tac's Avatar
 
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,351
Default Re: Mystery Engine Knock

Possibly a broken piston
Chuck Sea/Tac is offline   Reply With Quote
Old 06-23-2021, 06:12 PM   #15
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Mystery Engine Knock

UPDATE:
Ran the engine with a modified valve cover that has the top half cut off to see what the valves are doing. One of the valves on cylinder #3 is sticky and was closing hard. Time to pull the head and take it apart.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-25-2021, 11:57 AM   #16
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,011
Default Re: Mystery Engine Knock

Quote:
Originally Posted by chrs1961815 View Post
UPDATE:
Ran the engine with a modified valve cover that has the top half cut off to see what the valves are doing. One of the valves on cylinder #3 is sticky and was closing hard. Time to pull the head and take it apart.
I would suggest that you run some MMO or other top end lube for a while before pulling the head.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Old 06-25-2021, 12:35 PM   #17
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,330
Default Re: Mystery Engine Knock

Since you know exactly which valve it is, I wonder whether you could remove the manifold (a lot easier than removing the head) and then apply a penetrating oil spray to the opened valve from underneath. Might dissolve whatever's making it stick.
alexiskai is offline   Reply With Quote
Old 06-25-2021, 07:30 PM   #18
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Mystery Engine Knock

Before I took everything apart, I tried taking the cover off and spraying the stem with WD40 and also through the spark plug hole. I also sucked some MMO through the vacuum and in the gas. Didn't do anything.


So I took it apart yesterday and didn't find anything wrong with the valve itself, not bent. Nothing really on the stem of the valve. It fit perfectly in the valve guide with a little clearance on each side. I used some lapping compound on the stem and put it back together with lubricant.



Still have the sticky valve for whatever reason. I ordered some ball hones and I am going to take it back apart and hone a few thousandths off of the valve guide. At least that's the plan.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Old 06-26-2021, 10:36 AM   #19
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,011
Default Re: Mystery Engine Knock

Quote:
Originally Posted by chrs1961815 View Post
I ordered some ball hones and I am going to take it back apart and hone a few thousandths off of the valve guide. At least that's the plan.
I didn't know that they made ball hones that small.

BTW, is it an intake or an exhaust valve that's sticking?
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Old 06-27-2021, 08:15 AM   #20
ddweave
Member
 
ddweave's Avatar
 
Join Date: May 2010
Location: Waterloo, IL
Posts: 80
Default Re: Mystery Engine Knock

Could it be a weak valve spring?
__________________
Doug in Waterloo
ddweave is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:32 PM.