|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
08-14-2015, 12:46 PM | #1 |
Senior Member
Join Date: Nov 2010
Location: Beamsville,Ontario,Canada
Posts: 482
|
COLUMBIA with 3.78 gears
I would like to hear from anyone that is running a Columbia with 3.78 gears. How do you like it? I am thinking of this for a 32 3 window with a healthy 265 flathead, but with stock wheels and tire size. I have a 4.11 Columbia in my other car and am thinking of going up a step in the gear ratio for this one. Looking for your actual experience on this setup. Thanks!
|
08-14-2015, 12:49 PM | #2 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: COLUMBIA with 3.78 gears
I have done that with a 296 in a 32 coupe.
I didn't like it. |
Sponsored Links (Register now to hide all advertisements) |
|
08-14-2015, 01:06 PM | #3 |
Senior Member
Join Date: May 2010
Location: Green Bay
Posts: 391
|
Re: COLUMBIA with 3.78 gears
Pete:
What didn't you like about it? Thanks Dave/Green Bay |
08-14-2015, 03:14 PM | #4 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: COLUMBIA with 3.78 gears
|
08-14-2015, 02:24 PM | #5 | |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 855
|
Re: COLUMBIA with 3.78 gears
Quote:
Last edited by PeterC; 08-14-2015 at 03:24 PM. |
|
08-14-2015, 02:44 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: COLUMBIA with 3.78 gears
Sponsored Links (Register now to hide all advertisements)
|
08-14-2015, 03:21 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: COLUMBIA with 3.78 gears
Quote:
__________________
"I can explain it for you. However, I can't understand it for you". |
|
08-14-2015, 03:56 PM | #8 |
Senior Member
Join Date: May 2010
Location: Powell, TN
Posts: 2,509
|
Re: COLUMBIA with 3.78 gears
Its gonna depend on where you live, flatland or mtns, urban driving or country.
|
08-14-2015, 05:19 PM | #9 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: COLUMBIA with 3.78 gears
Good point... around here, lots of hills. None too steep but many are very long.
__________________
"I can explain it for you. However, I can't understand it for you". |
08-14-2015, 04:32 PM | #10 |
Senior Member
Join Date: May 2010
Location: imperial,mo
Posts: 694
|
Re: COLUMBIA with 3.78 gears
i have a Columbia in my `37 1/2 ton with a 22 lb. flywheel on a 239 c.i. motor, single 94 with a Max-1 and a 28 tooth cluster and a 3:78 r&p with 7.00 x 16". and after 4,000 miles, i wouldn`t change a thing. and i know my next statement is going to get a response . . . # 41 jets in the carb. blast away!
tom |
08-14-2015, 06:27 PM | #11 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Re: COLUMBIA with 3.78 gears
3.78 in my 35 roadster Works greatin hills and on highway
__________________
DON P |
08-14-2015, 07:17 PM | #12 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: COLUMBIA with 3.78 gears
My '47 convertible has a 3:78 rear, and an overdrive with a 33 percent reduction. it is fine above 45 mph, but lugs below that. It will run at hiway speeds of 60 to 70 mph, which pushes the stock handling and braking to limit. What you select must be based on the intended use, lots of hiway, or mostly city, because the balnce is tricky to reach.
|
08-14-2015, 07:54 PM | #13 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: COLUMBIA with 3.78 gears
I didn't know what a Columbia O/D reduction was? It has quite a drop in RPM.
|
08-14-2015, 08:35 PM | #14 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 855
|
Re: COLUMBIA with 3.78 gears
|
08-14-2015, 08:30 PM | #15 |
Senior Member
Join Date: May 2010
Location: Boerne, TX
Posts: 142
|
Re: COLUMBIA with 3.78 gears
27% reduction as I remember.
|
08-14-2015, 08:39 PM | #16 |
Senior Member
Join Date: Sep 2011
Location: Spanaway, Washington
Posts: 344
|
Re: COLUMBIA with 3.78 gears
I have had 3.78/Columbia in both my coupe and PU for around 10 years.
Just '040 over 239 with dual 97's, heads and mild cams. They work great in all kinds of driving. Wouldn't change a thing...except maybe the 25 tooth Zephyrs in my coupe. |
08-14-2015, 10:49 PM | #17 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: COLUMBIA with 3.78 gears
PeterC
What is your rear tire size? Diameter? On my 32, I have a Gear Vendors O/D that reduces the final ratio from 4.11 to 3.21. My tires are 29 to 29 1/2" tall. In O/D at 65 mph, my engine turns about 2300 rpm. Wondered what yours is? Thanks, Jim |
08-15-2015, 07:37 AM | #18 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 855
|
Re: COLUMBIA with 3.78 gears
Rear tire diameter looks like 30" to me - Tire is Coker Firestone bias 700 X16 - I do not have a tach but guess is 2300 rpm sound reasonable.
|
08-15-2015, 09:09 AM | #19 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 855
|
Re: COLUMBIA with 3.78 gears
so 38 Coupe - with your chart (thank you very much!) 2354rpm @ 65mph is indicated for a 4:11gear and Columbia in high with a 28" tire - so both Kahuna and I are in sync at the "guestimated" 2300 rpm at 65mph - although with my 30" tire I am probably a tad lower rpm at 65mph - nice to know.
|
08-15-2015, 07:34 AM | #20 |
Senior Member
Join Date: Nov 2014
Location: Shell Knob Missouri
Posts: 151
|
Re: COLUMBIA with 3.78 gears
My 48 has 3.78 columbia max 1 cam 259 ci. offey heads. 2 ecg carbs. 51 jets. light flywheel. pulls good. I think it's a good set up.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|