|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-18-2020, 01:48 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Kingston Ontario Canada
Posts: 251
|
49 ford push button radio
HI guys how do I set the push buttons on the radio so it will stop on the station ?. thanks, Jack
|
09-18-2020, 02:31 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: Delanco, New Jersey
Posts: 115
|
Re: 49 ford push button radio
Jack
Tune the station with the manual tuning knob. Then reduce volume then loosen the desired push button by turning the button counterclockwise one turn. Push the button in until it bottoms and release carefully. Tighten the button securely by turning it clockwise. Adjust volume. Adjust the remaining buttons. Copied from page 186 section (b) Push Button of the Green Bible. Not many AM stations remain these days. Hope this helps, Tom |
Sponsored Links (Register now to hide all advertisements) |
|
09-18-2020, 03:45 PM | #3 |
Senior Member
Join Date: Aug 2010
Location: New Zealand
Posts: 1,111
|
Re: 49 ford push button radio
I know this does not answer your question . We left our original PB radio as a facade and fitted a blue tooth unit behind it operated by a remote.
|
09-19-2020, 10:26 AM | #4 |
Senior Member
Join Date: Dec 2012
Location: Kingston Ontario Canada
Posts: 251
|
Re: 49 ford push button radio
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|