|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-10-2022, 05:11 PM | #1 |
Member
Join Date: Jun 2020
Location: Orange Massachusetts
Posts: 75
|
1930 Tudor wire harnesses
I recently became the proud owner of yet another Model A (#7) this one is a 1930 tudor. The harness that is in it is all cobbed together, I have replaced harnesses several times and have never come across this problem, it has two bulb headlights and cowl lights I cannot seem to find a harness that will cover both, did somebody add one or the other that don’t belong?
Thanks again. Daba |
06-10-2022, 05:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,749
|
Re: 1930 Tudor wire harnesses
Should only have one or the other not both.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-10-2022, 05:45 PM | #3 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,131
|
Re: 1930 Tudor wire harnesses
And that’s why it was cobbled together!
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
06-10-2022, 06:26 PM | #4 |
Member
Join Date: Jun 2020
Location: Orange Massachusetts
Posts: 75
|
Re: 1930 Tudor wire harnesses
OK thank you I will go with one light in the headlight. The Cowl lights are in very good shape and the holes are already there looks like they’re going to win.
Thanks again |
06-11-2022, 09:58 AM | #5 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: 1930 Tudor wire harnesses
Some use the cowls for turn signals, front socket for park.
|
06-11-2022, 08:03 PM | #6 |
Senior Member
Join Date: May 2010
Location: Plano, Texas
Posts: 843
|
Re: 1930 Tudor wire harnesses
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|