|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-27-2012, 06:56 PM | #1 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Starter end play
What is the starter end play tolerence for the flathead starters? I tested the starter and generator off of the 21 stud 37 engine today and both seem to be in working order. But the starter has what seems to be abit excessive end play. The book I ordered yesterday is not here and I might as well get this taken care of while I am waiting. Also are there any book recomendations?, keep in mind I am only using the engine from the 37 and already have Mac VanPelt's transmission book. Likely will be using a 39 rearend that will need a good going through. Thanks Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! Last edited by Rowdy; 09-28-2012 at 07:18 AM. |
09-28-2012, 09:15 AM | #2 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Starter end play
Guessing there isn't a spec, so will shim it until I am happy with it. Thanks Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
Sponsored Links (Register now to hide all advertisements) |
|
09-28-2012, 02:05 PM | #3 | |
Senior Member
|
Re: Starter end play
Quote:
jdl |
|
09-28-2012, 03:57 PM | #4 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Starter end play
Yup, just shim with a fiber washers until end play is just noticeable by hand feel.
|
09-28-2012, 04:18 PM | #5 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Starter end play
Sponsored Links (Register now to hide all advertisements)
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|