|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-02-2011, 07:22 PM | #1 |
Senior Member
Join Date: May 2010
Location: Pell City (New London) Al
Posts: 317
|
exhaust gasket - manifold to tailpipe
Anyone know of a source for the gasket for the manifold to tailpipe flange.It seems as tho it should be easy to locate but I can't find 'em. Help-Bill
|
05-02-2011, 07:53 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: exhaust gasket - manifold to tailpipe
The ones for the 8BA and 8CM pipe to manifold should be available through NAPA. The part number is for the old L-6 engine 1GA-9450 but will fit most 8BA/8CM types. The cross over pipe gaskets are a different part number.
The 18-9448-A for 32 to 48 cars should be available in the exhaust manifold gasket sets 18-9433 that are available through Macs, C&G, Carpenter's, Van Pelts, or any number of other early Ford V8 parts vendors. Best gasket sets should also have them in their sets. Kerby |
Sponsored Links (Register now to hide all advertisements) |
|
05-02-2011, 08:06 PM | #3 |
Senior Member
Join Date: May 2010
Location: Pell City (New London) Al
Posts: 317
|
Re: exhaust gasket - manifold to tailpipe
Sorry,I didn't make it clear! I've put duels on my '41 and it's actually the cross over gaskets I need. The duels replace the cross over. At least till I get a set of Rod's manifolds!
|
05-02-2011, 08:14 PM | #4 |
Senior Member
Join Date: May 2010
Location: Pell City (New London) Al
Posts: 317
|
Re: exhaust gasket - manifold to tailpipe
Forgot to say ''thanks" Kerby! also-do you happen to have the no's for the crossover gasket? Thanks again--Bill
|
05-03-2011, 08:04 AM | #5 |
Senior Member
Join Date: May 2010
Location: ManchVegas, New Hampshah
Posts: 1,589
|
Re: exhaust gasket - manifold to tailpipe
#256-729 Bosal or Victor fits. The number crosses to Saab 900 and '70 & '80 fords. The 2 bolt holes are 7/16" centered on 3" Center hole is 1 3/4" with a steel fire ring.
|
05-03-2011, 08:40 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: exhaust gasket - manifold to tailpipe
Sponsored Links (Register now to hide all advertisements)
I had a little trouble finding them for a 51 Mercury crossover & heat riser valve until I found that the old types would work even though not original. We just have to use what we can find these days. Kerby |
05-03-2011, 03:48 PM | #7 |
Senior Member
Join Date: May 2010
Location: Pell City (New London) Al
Posts: 317
|
Re: exhaust gasket - manifold to tailpipe
Thanks Kerby and 41ford1 What a great help we get from friends never seen!! Bill
|
07-14-2011, 09:43 PM | #8 | ||
Junior Member
Join Date: May 2011
Posts: 14
|
Re: exhaust gasket - manifold to tailpipe
Quote:
Quote:
Last edited by richkid; 07-16-2011 at 04:55 AM. |
||
|
|
Sponsored Links (Register now to hide all advertisements) |
|