05-23-2010, 07:07 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 1,304
|
john charlton
Just wondered if anyone has had the 5 hole Budd truck wheels and rings powder coated. As powder coating is thicker than regular paint does it still allow the keeper ring to seat properly on the rim ???
John in hot sunny spring day England |
05-23-2010, 09:12 AM | #2 |
Banned
Join Date: May 2010
Location: Sturgeon Bay, Wisconsin
Posts: 408
|
Re: john charlton
We are talking split rims, correct? Looks like these?
P-Coat is about 3 to 4 mils thick if done on a warmed rim. I can think of no reason why this would not be fine with P-coated rims and rings. Hold down Control button, and hit the + button to enlarge pic, maybe. Control down and hit - to go back to smaller size. Also any paint questions can be addressed to Product Finishing Magazine's on-line fourm. Goggle it, you'll find it. skip. Last edited by skip; 05-27-2010 at 06:20 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
05-23-2010, 12:44 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 1,304
|
Re: john charlton
Thanks Skip a powder coating we will go !!!
John |
05-23-2010, 01:39 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 2,599
|
Re: john charlton
Sponsored Links (Register now to hide all advertisements)
Maybe this forum will have some more ideas also. http://forums.aa-fords.com/viewforum.php?f=1 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|