Red's headers

[Shoebox]

I have purchased a lot of stuff from Red's Headers and always been happy with everything. Recently I opened up a bag of cylinder head acorn nuts and found out I had 47...... one short. I've been calling, sent email, smoke signals, whatever, with no luck. I am just asking if anyone has had any recent contact with them. Thanks.

[Tim Ayers]

Funny you mention this. I've also had great service with Red's. I wanted to order more head gaskets and found the store on their website difficult and almost unusable. It was unusual since all of my other transactions were seamless.

I just haven't had time to give them a call to see what's going on.

[Shoebox]

Originally Posted by Tim Ayers

Funny you mention this. I've also had great service with Red's. I wanted to order more head gaskets and found the store on their website difficult and almost unusable. It was unusual since all of my other transactions were seamless.

I just haven't had time to give them a call to see what's going on.

Regarding their website, there is one ending with .com and another ending with .net, this is the one to use, although I don't know the story behind this, and it is kinda difficult to use.

[Zax40]

Hate to her that. I have always had good experiences with Red's in the past. Hopefully they are just having temporary staffing issues or something

[corvette8n]

I’ve called them about 3 years ago and had no problem ordering an exhaust pipe to go with my reds headers. They help me get the correct one as they had two listed on the website.

[Tim Ayers]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by corvette8n

I’ve called them about 3 years ago and had no problem ordering an exhaust pipe to go with my reds headers. They help me get the correct one as they had two listed on the website.

Same here. Most recent purchase was approx. 4 months ago, so I was surprised to find their online ordering changed since then.

[GB SISSON]

Just in case this all goes south and you don't get your missing acorn, I have a partial set here and would be pleased to send you a couple. Send me a PM

[Shoebox]

Originally Posted by GB SISSON

Just in case this all goes south and you don't get your missing acorn, I have a partial set here and would be pleased to send you a couple. Send me a PM

Thanks for your generous offer GB, I believe I found a source for the same acorn nuts, who sell individually or in bulk. Who knows, might even be the source Red's used.


I posted the same question about Red's on the HAMB and one guy said he tried to buy a Model A header last summer and never got to through to anyone, bummer.

[uncle buck]

Originally Posted by Shoebox

Regarding their website, there is one ending with .com and another ending with .net, this is the one to use, although I don't know the story behind this, and it is kinda difficult to use.

The .com vs .net could be the difference between the old owner that retired several years ago, vs the new owner

[tubman]

Specifically, which is the one that works? ".com" or ".net"?

[Tim Ayers]

Originally Posted by tubman

Specifically, which is the one that works? ".com" or ".net"?

I've tried both and neither worked for me last week. Neither site would allow me to put items into the "cart".

[40cpe]

Originally Posted by Tim Ayers

I've tried both and neither worked for me last week. Neither site would allow me to but items into the "cart".

I was able to put a part into the .net site cart a few minutes ago
.

[Tim Ayers]

Originally Posted by 40cpe

I was able to put a part into the .net site cart a few minutes ago
.

Interesting. I'll try again.

[flatjack9]

When I go to Red's, I get a warning that it is a dangerous site.

[Mac VP]

Originally Posted by flatjack9

When I go to Red's, I get a warning that it is a dangerous site.

That’s not necessarily a problem. Our regular website will often show up as “unsecure” for some reason. Even though you can’t order anything from the site. Our online store is a completely different website which has the required security for doing business online and has the needed security.

[Shoebox]

I just received this on the Flat Spot forum:





Bill BoomerScott Engelhart they are very much open. Their webpage was hit by a scammer. Victor J. R. Garcia is working very hard to fix the page and is also selling as fast as he can get parts in. Be patient and keep phoning. I received a large order 10 days ago in Canada.

[Tim Ayers]

Ah, makes sense. It just wasn't adding up from past experiences. Thanks for reporting back.

[Bored&Stroked]

Originally Posted by Shoebox

Thanks for your generous offer GB, I believe I found a source for the same acorn nuts, who sell individually or in bulk. Who knows, might even be the source Red's used.


I posted the same question about Red's on the HAMB and one guy said he tried to buy a Model A header last summer and never got to through to anyone, bummer.

Hey Shoebox, are you talking about the 7/16 NF heat-treated acorn nuts for the head studs? Did you get them from ARP or somebody else?

[Shoebox]

Originally Posted by Bored&Stroked

Hey Shoebox, are you talking about the 7/16 NF heat-treated acorn nuts for the head studs? Did you get them from ARP or somebody else?

I found them at ALLEN'S FASTENERS, Ronnie Roadster told me about them. Also got some ARP items from them, very reasonable prices.

[BlueNotes]

Has anyone else been in touch recently with Red's Headers? I ordered and paid for a set of headers November 12. They had the headers in stock according to the website, but I haven't received them yet. I've tried to get in touch with them by e-mail and phone without any success.

[Tim Ayers]

Originally Posted by Shoebox

I found them at ALLEN'S FASTENERS, Ronnie Roadster told me about them. Also got some ARP items from them, very reasonable prices.

Allen's is the best kept secret for ARP stuff.

[51shoeboxer]

Originally Posted by BlueNotes

Has anyone else been in touch recently with Red's Headers? I ordered and paid for a set of headers November 12. They had the headers in stock according to the website, but I haven't received them yet. I've tried to get in touch with them by e-mail and phone without any success.

On April 22, I ordered a set of headers for my recently acquired 1951 Custom Convertible. It took me several tries via email and phone, but I finally got through to someone on the phone; and was able to place my order. They told me they would notify me via email when they were shipping the headers.

[51shoeboxer]

Originally Posted by BlueNotes

Has anyone else been in touch recently with Red's Headers? I ordered and paid for a set of headers November 12. They had the headers in stock according to the website, but I haven't received them yet. I've tried to get in touch with them by e-mail and phone without any success.

When did you get your headers?

[BlueNotes]

Originally Posted by 51shoeboxer

When did you get your headers?

I ordered them November 12 and received them December 10.

[51shoeboxer]

Originally Posted by BlueNotes

I ordered them November 12 and received them December 10.

Thanks for the reply. I'm hoping for a similar timeframe.

[petehoovie]

Sponsored Links (Register now to hide all advertisements)