The Ford Barn

T&A Flathead · 08-25-2013, 08:51 PM

Is anyone reproducing the convertible top latches and mating hardware?
Thanks Tim

Vic Piano · 08-26-2013, 05:40 AM

I think for a while Bob Drake or Dennis Carpenter were making the top latch, etc. As I recall, they were pricy.

You might try LeBaron Bonney to see if they have them.

GaryTx · 08-26-2013, 06:50 AM

Yes they are reproduced. See the link below...

http://www.1946ford.com/latches.html

johnny · 08-27-2013, 08:32 PM

Sponsored Links (Register now to hide all advertisements)

I have a set, new made in brass ,would have to be plated Johnny.

08-25-2013, 08:51 PM	#1
T&A Flathead Member Join Date: Jul 2011 Location: Pewaukee, WI (Milwaukee) Posts: 50	1948 convertible top latch Is anyone reproducing the convertible top latches and mating hardware? Thanks Tim

08-26-2013, 05:40 AM	#2
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: 1948 convertible top latch I think for a while Bob Drake or Dennis Carpenter were making the top latch, etc. As I recall, they were pricy. You might try LeBaron Bonney to see if they have them. __________________ Imagination is more important than knowledge.

08-26-2013, 06:50 AM	#3
GaryTx Senior Member Join Date: May 2010 Location: Fort Worth, Texas Posts: 350	Re: 1948 convertible top latch Yes they are reproduced. See the link below... http://www.1946ford.com/latches.html Last edited by GaryTx; 08-26-2013 at 07:02 AM.

08-27-2013, 08:32 PM	#4
johnny Senior Member Join Date: May 2010 Location: London On, Can. Posts: 377	Re: 1948 convertible top latch Sponsored Links (Register now to hide all advertisements) I have a set, new made in brass ,would have to be plated Johnny.