The Ford Barn

mercury39 · 03-10-2020, 02:10 PM

how far out do the head studs stick out?

fuzes45 · 03-10-2020, 02:44 PM

In les book he gives dimension for stud height, will give correct amount so studs go through nut.
Bob

Russ/40 · 03-10-2020, 04:55 PM

Dont have a measurement, but the studs (stock that is) have a crown on top. The crown and plus one thread i believe is correct.

Doug Linden · 03-10-2020, 08:20 PM

Sponsored Links (Register now to hide all advertisements)

The regular length studs should be 2 3/4" above the deck. The longer stud for the ignition switch (stud #8) is 2 29/32" and the long water outlet studs should be 5".
My HC head had been planed so I had to do a little adjusting to get the right fit.

03-10-2020, 02:10 PM	#1
mercury39 Junior Member Join Date: Mar 2016 Location: Davie, Florida Posts: 2	Head Studs how far out do the head studs stick out?

03-10-2020, 02:44 PM	#2
fuzes45 Member Join Date: Nov 2016 Location: Corrupt-A -Cut Eastern,Ct Posts: 54	Re: Head Studs In les book he gives dimension for stud height, will give correct amount so studs go through nut. Bob

03-10-2020, 04:55 PM	#3
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Head Studs Dont have a measurement, but the studs (stock that is) have a crown on top. The crown and plus one thread i believe is correct.

03-10-2020, 08:20 PM	#4
Doug Linden Senior Member Join Date: May 2010 Location: Massachusetts Posts: 259	Re: Head Studs Sponsored Links (Register now to hide all advertisements) The regular length studs should be 2 3/4" above the deck. The longer stud for the ignition switch (stud #8) is 2 29/32" and the long water outlet studs should be 5". My HC head had been planed so I had to do a little adjusting to get the right fit.