Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-15-2019, 09:40 PM   #1
JoeCB
Senior Member
 
JoeCB's Avatar
 
Join Date: Nov 2018
Location: Farmington MI
Posts: 281
Default Shock fluid substitute

Just wondering … original shock fluid was some glycerin based stuff, that was hygroscopic (absorbs water). If the car is used exclusively in mild weather, so viscosity change is not an issue can oil of some sort be used? What viscosity will be a question I suppose but surly better for lubricity and rust prevention.
Anyone done this ?

Joe B
JoeCB is offline   Reply With Quote
Old 01-15-2019, 09:45 PM   #2
JD 1931
Senior Member
 
JD 1931's Avatar
 
Join Date: Jul 2010
Location: west coast Fla..
Posts: 311
Default Re: Shock fluid substitute

I use hydraulic jack oil.
JD 1931 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-15-2019, 10:06 PM   #3
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Shock fluid substitute

Some have told me that they used STP oil treatment in the shocks that they rebuilt .
Purdy Swoft is offline   Reply With Quote
Old 01-15-2019, 10:11 PM   #4
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,088
Default Re: Shock fluid substitute

Hydraulic jack oil too!!
Attached Images
File Type: jpg walter dripping nose.jpg (19.0 KB, 5 views)
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Old 01-15-2019, 11:00 PM   #5
Flathead
Senior Member
 
Flathead's Avatar
 
Join Date: May 2010
Location: Southern Maine
Posts: 1,493
Default Re: Shock fluid substitute

What you use for fluid will depend on how good the clearances are in your shocks. If not very tight STP, if tighter maybe jack oil. Either one will lubricate better than the old glycerin.
Flathead is offline   Reply With Quote
Old 01-16-2019, 12:06 AM   #6
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: Shock fluid substitute

Sponsored Links (Register now to hide all advertisements)
Motorcycle fork oils will give a choice of viscosity
I once found charts of testing of motorcycle fork oils, in the viscosity range automatic transmission fluid worked as well as the best, there also was tested tractor multi viscosity hydraulic oil, ---good antifoam, costs less ,as good as best fork oils

My shocks fit tight, originally I filled with jack oil, but have been topping off with ATF because it was in the oil can, been squirting the springs too, had to tighten up the shocks up when the oil soaked into the springs
Kurt in NJ is offline   Reply With Quote
Old 01-16-2019, 11:14 AM   #7
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: Shock fluid substitute

I have been running with STP for many years in the original socks on my Coupe.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 01-16-2019, 12:15 PM   #8
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Shock fluid substitute

I used to run an additive similar to STP in my '54 Olds knee-action shocks because they were old and leaked a little. This really firmed up the ride! I assume STP would do the same? You could mix oil and STP to get the ride you want.
Jim Brierley is offline   Reply With Quote
Old 01-16-2019, 06:33 PM   #9
MrBruce
Senior Member
 
MrBruce's Avatar
 
Join Date: Oct 2014
Location: Charlotte, NC
Posts: 310
Default Re: Shock fluid substitute

Quote:
Originally Posted by JoeCB View Post
Just wondering … original shock fluid was some glycerin based stuff, that was hygroscopic (absorbs water). If the car is used exclusively in mild weather, so viscosity change is not an issue can oil of some sort be used? What viscosity will be a question I suppose but surly better for lubricity and rust prevention.
Anyone done this ?

Joe B


We just had a shock seminar and used regular 30 W oil in the rebuilt shocks and this guy has restored dozens of them. It really worked nice when put back together. I see Bratton's sells hydraulic oil for shocks, but we used regular 30w motor oil.
MrBruce is offline   Reply With Quote
Old 01-16-2019, 07:46 PM   #10
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,114
Default Re: Shock fluid substitute

Quote:
Originally Posted by MrBruce View Post
We just had a shock seminar and used regular 30 W oil in the rebuilt shocks and this guy has restored dozens of them. It really worked nice when put back together. I see Bratton's sells hydraulic oil for shocks, but we used regular 30w motor oil.
This gets me wondering what would a10w30 oil due?
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
Big hammer is offline   Reply With Quote
Old 01-16-2019, 08:29 PM   #11
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 582
Default Re: Shock fluid substitute

regular light hyd oil here
Beater is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:57 PM.