|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-30-2005, 11:54 AM | #1 |
Guest
Posts: n/a
|
38 coupe parcel shelf
My coupe ute seems to be missing the parcel shelf lip which prevents parcels etc. sliding off. I am pretty sure I can see such a lip in Mallast's 38-39 Ford Book, Pg.3-22. Could someone give me a brief description so that I can make something similar ? E.g. Is it solid wood, ply wood or sheet steel? Is the top edge rolled or shaped ? are the ends squared off or rounded? Any info would be helpful. |
03-30-2005, 01:55 PM | #2 |
Guest
Posts: n/a
|
Re: 38 coupe parcel shelf
On my 39 coupe the lip is 53 inches wide by 3 1/4 inches high. Made of natural wood & is screwed to the front of the plywood parcel tray. Regards Chris. NZ. |
Sponsored Links (Register now to hide all advertisements) |
|
03-30-2005, 06:00 PM | #3 |
Guest
Posts: n/a
|
Re: 38 coupe parcel shelf
Sponsored Links (Register now to hide all advertisements)
Correction. Lip sits on top of the edge of the parcel tray & is attached by several screws from beneath. Regards Chris. NZ. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|