The Ford Barn

1930 coupe · 09-22-2015, 11:45 AM

...

Bob C · 09-22-2015, 11:54 AM

That works on the same principal as Vince's Rule of Nine.
http://www.fordgarage.com/pages/ruleofnine.htm

Bob

John · 09-22-2015, 12:50 PM

I have one also. I picked it up at Hershey a few years back. Yours is the only other one I have seen.

John

BILL WILLIAMSON · 09-22-2015, 01:04 PM

I had a TDC whistle for the plug hole, sounded a middle "C" going up & a high "C" going down!!
Some engines used a 2 position system, for adjusting ALL the valves.
Bill W.

TinCup · 09-22-2015, 01:24 PM

Sponsored Links (Register now to hide all advertisements)

Wow jealous would sure like to have one of those.

09-22-2015, 11:45 AM	#1
1930 coupe Senior Member Join Date: May 2010 Posts: 226	... Last edited by 1930 coupe; 02-23-2016 at 06:01 PM.

09-22-2015, 11:54 AM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,747	Re: Strange valve tool That works on the same principal as Vince's Rule of Nine. http://www.fordgarage.com/pages/ruleofnine.htm Bob

09-22-2015, 12:50 PM	#3
John Senior Member Join Date: May 2010 Location: Richmond, VA Posts: 189	Re: Strange valve tool I have one also. I picked it up at Hershey a few years back. Yours is the only other one I have seen. John

09-22-2015, 01:04 PM	#4
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Strange valve tool I had a TDC whistle for the plug hole, sounded a middle "C" going up & a high "C" going down!! Some engines used a 2 position system, for adjusting ALL the valves. Bill W. __________________ "THE ASSISTANT GURU OF STUFF"

09-22-2015, 01:24 PM	#5
TinCup Senior Member Join Date: May 2010 Location: OKC / Tonkawa, Ok. Posts: 1,977	Re: Strange valve tool Sponsored Links (Register now to hide all advertisements) Wow jealous would sure like to have one of those. __________________ Oklahoma City Model A Restorers Group.