03-26-2021, 01:19 PM | #1 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Starter bolts
I have a "S-pot" full of what I believe are starter through bolts, but they are shorter than the early starter bolts. Can anyone give me the length and size of the 49 and up starter bolts. I have looked through my parts books as best as my crippled/numb fingers will allow and I can't find anything. Same problem with 60HP starter bolts. I think I have a few of those as well. Thanks a bunch, fellows.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
03-26-2021, 02:51 PM | #2 |
Senior Member
Join Date: May 2010
Location: N.W. Iowa
Posts: 306
|
Re: Starter bolts
My Ford Parts Manual lists them as 5/16 - 18 x 7.15 inches. If it has Fordomatic the length is 7.65 inches.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-26-2021, 05:51 PM | #3 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: Starter bolts
Sponsored Links (Register now to hide all advertisements)
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
|
|
Sponsored Links (Register now to hide all advertisements) |
|