The Ford Barn

Bob from Northport · 05-28-2023, 09:15 PM

Anyone know of a supplier for these trim pieces for the lower rear panel areas on a 54 Mercury???

Daves55Sedan · 05-28-2023, 10:21 PM

I used to know a few around the country but that was 30 years ago or longer and they probably gone now. Try Hemmings Motor News classified ads. They used to advertise stuff like this.

paul2748 · 05-29-2023, 07:18 PM

Do you belong to any national Mercury clubs ? If so, check there. It's a good idea to join one of these clubs as they can be a very good source for information and parts.

And if your on Facebook, check for a Mercury site there. The Ford and Tbird guys have sites there and can be good source.

Abe Lugo · 06-01-2023, 01:55 PM

keep a search going for Mercury (stone,gravel) guard

If you know someone that rolls bicycle fender, they might be able to roll it smooth a bit.

randomly typed into ebay 70.00 - Im not sure they are all the same 2-4 doors and different models.

https://www.ebay.com/itm/32241998296...Bk9SR665qYWPYg

Bob from Northport · 06-01-2023, 06:14 PM

Thats what I Need Both sides
Thanks!!

bobss396 · 06-04-2023, 07:05 AM

Sponsored Links (Register now to hide all advertisements)

Set up a search on eBay, check it once in a while. This is how I got most of my trim pieces.

05-28-2023, 09:15 PM	#1
Bob from Northport Senior Member Join Date: May 2010 Location: 215 E. 6th Street Northport, Michigan 49670 Posts: 941	Trim pieces supplier questiion Anyone know of a supplier for these trim pieces for the lower rear panel areas on a 54 Mercury??? __________________ Bob from Northport Northport, Michigan Last edited by Bob from Northport; 08-07-2023 at 06:00 PM.

05-28-2023, 10:21 PM	#2
Daves55Sedan Senior Member Join Date: May 2010 Location: Granite City, Illinois Posts: 3,008	Re: Trim pieces supplier questiion I used to know a few around the country but that was 30 years ago or longer and they probably gone now. Try Hemmings Motor News classified ads. They used to advertise stuff like this.

05-29-2023, 07:18 PM	#3
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,982	Re: Trim pieces supplier questiion Do you belong to any national Mercury clubs ? If so, check there. It's a good idea to join one of these clubs as they can be a very good source for information and parts. And if your on Facebook, check for a Mercury site there. The Ford and Tbird guys have sites there and can be good source. __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

06-01-2023, 06:14 PM	#5
Bob from Northport Senior Member Join Date: May 2010 Location: 215 E. 6th Street Northport, Michigan 49670 Posts: 941	Re: Trim pieces supplier questiion Thats what I Need Both sides Thanks!! __________________ Bob from Northport Northport, Michigan

06-04-2023, 07:05 AM	#6
bobss396 Senior Member Join Date: Aug 2014 Posts: 721	Re: Trim pieces supplier questiion Sponsored Links (Register now to hide all advertisements) Set up a search on eBay, check it once in a while. This is how I got most of my trim pieces.