Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-17-2010, 05:46 PM   #1
itslow
Senior Member
 
itslow's Avatar
 
Join Date: May 2010
Location: Central Iowa
Posts: 687
Default 1932 and 1933-34 Cab Mounting Wood

I see that the various vendors lump these three years together when it comes to the cab mounting wood. Are these pieces indeed usable between the years? Are the heights and contours the same? I do know that the length and hole locations of the forward pieces are not the same between the years, but are the height and frame-side contour the same?

Which vendors sell the correct '32 parts? I've found the set I have is obviously for a '33/34 (given the length and holes of the front 2-pieces) and leaves the body sitting on the frame instead of the wood.
__________________
Mike

Wanted:
- '32-34 Open Cab Pickup (RPU) parts and documents/articles/info
- ARDUN parts
itslow is offline   Reply With Quote
Old 11-17-2010, 07:37 PM   #2
Krylon32
Senior Member
 
Join Date: May 2010
Posts: 4,430
Default Re: 1932 and 1933-34 Cab Mounting Wood

I bought 32 cab specific wood from Macks Reproductions in Missouri and all the holes lined up and when I got done so did the hood.
Krylon32 is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-17-2010, 10:21 PM   #3
Roy Nacewicz
Junior Member
 
Roy Nacewicz's Avatar
 
Join Date: May 2010
Location: Carleton, Mi.
Posts: 13
Default Re: 1932 and 1933-34 Cab Mounting Wood

Quote:
Originally Posted by itslow View Post
I see that the various vendors lump these three years together when it comes to the cab mounting wood. Are these pieces indeed usable between the years? Are the heights and contours the same? I do know that the length and hole locations of the forward pieces are not the same between the years, but are the height and frame-side contour the same?

Which vendors sell the correct '32 parts? I've found the set I have is obviously for a '33/34 (given the length and holes of the front 2-pieces) and leaves the body sitting on the frame instead of the wood.
Mike, email me at [email protected] and I'll give you the "skinny" on all this
Roy Nacewicz
Roy Nacewicz is offline   Reply With Quote
Old 11-19-2010, 11:21 AM   #4
itslow
Senior Member
 
itslow's Avatar
 
Join Date: May 2010
Location: Central Iowa
Posts: 687
Default Re: 1932 and 1933-34 Cab Mounting Wood

Roy, you need to add these blocks to your product line!
__________________
Mike

Wanted:
- '32-34 Open Cab Pickup (RPU) parts and documents/articles/info
- ARDUN parts
itslow is offline   Reply With Quote
Old 11-19-2010, 03:43 PM   #5
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,462
Default Re: 1932 and 1933-34 Cab Mounting Wood

Cauton all; The old original wood is usually shrunk and copies frequenty let your body contact the frame. Newc
Newc is offline   Reply With Quote
Old 11-19-2010, 04:37 PM   #6
32dude
Senior Member
 
Join Date: May 2010
Location: Spring, Tx.
Posts: 107
Default Re: 1932 and 1933-34 Cab Mounting Wood

Sponsored Links (Register now to hide all advertisements)
1932 truck wood is different than 33-34

Bruce
32dude is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:29 AM.