Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-26-2014, 04:11 PM   #1
randyta
Junior Member
 
Join Date: Dec 2013
Location: Gainesville, VA
Posts: 14
Default Wiper Blade Adjusting

Put a new arm and blade on my vacuum wiper in my 30 CCPU. It works back & forth but the blade does not flop from side to side. Wipes pretty good one way but skips when going back. Any way to adjust something to make the blade flop from side to side?

Thanks

Randy
randyta is offline   Reply With Quote
Old 05-26-2014, 05:05 PM   #2
Randy in Illinois
Senior Member
 
Randy in Illinois's Avatar
 
Join Date: Jul 2011
Location: Illinois
Posts: 193
Default Re: Wiper Blade Adjusting

Sponsored Links (Register now to hide all advertisements)
Randyta, some blades do and some are tight, model a wipers don't. Wipe as good like modern wipers do no matter what, unless everything NOS . i use rain X, only need to use the wiper, is to show it works
Randy in Illinois is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:21 AM.