07-08-2020, 01:48 PM | #1 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
wiring harness
no lights, no horn. question the business end of the harness is a round disc with 9 terminals. those terminals are in 3 groups of three looking at the back side it looks like each set is tied together. so if i put one wire from an ohm meter on one wire in the back should i get continuity when i put the other wire from the meter on each of the nine terminals on the front?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|