Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-17-2016, 01:14 PM   #1
KenCoupe
Senior Member
 
KenCoupe's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 234
Default Coupe Package Tray bar

I have a 1931 Coupe. I recently installed a LeBarron Bonney upholstery kit. My question is about the package tray and the seat back cushion brackets. As referenced in the Service Bulletins on page 257 (regarding moving the seat to give more room for tall people), a package tray bar and seat back cushion brackets (A-47942-B) are mentioned. I do not have either of those items and I am not tall, so I would like to install those parts. I have looked online at the major suppliers catalogs and cannot find either part. I have not called Bert's yet to see if they have originals in stock. If I am not able to get these parts from Bert's, do you know of any other sources for these parts? Or do you have measurements for these parts so I could try to make them? Also, does anybody have any photos of these parts? It would be helpful to me to be able to see photos of them.

Thanks for any help you can give me.

Ken
KenCoupe is offline   Reply With Quote
Old 07-17-2016, 02:14 PM   #2
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 6,705
Default Re: Coupe Package Tray bar

You might try this ad: http://www.fordbarn.com/forum/showthread.php?t=200697 I don't know exactly what you need or what he has so I will just point you in his direction.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-17-2016, 03:40 PM   #3
KenCoupe
Senior Member
 
KenCoupe's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 234
Default Re: Coupe Package Tray bar

Sponsored Links (Register now to hide all advertisements)
Thanks for the link.

The link below has the picture that is in the Service Bulletins. According to the bulletin, the package tray bar is screwed into the front of the package tray itself with the four screws (C). The brackets I am asking about are labeled "D" in the picture.

http://www.modelagarage.com/node/163

Thanks again,

Ken
KenCoupe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:36 PM.