Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-18-2020, 10:57 AM   #1
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default '32 Woodie "survivoration" project

Hey, all. I thought I'd start a new thread for my woodie project. I'm not sure how interesting it will be for folks, but I'll share the story and some pics. We'll just see what does, or doesn't, happen with it.
ro is offline   Reply With Quote
Old 07-18-2020, 11:20 AM   #2
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

There's a good chance some of you have actually seen this wagon before, albeit in pieces. It was hauled to Hershey in 2011 in pieces. It was purchased there and resold to a new owner in California. While there, new structural pieces were made by Wood 'n Carz. This includes the main roof supports and all of the pillars. New rear quarter belt line was also produced at that time. From California, it was acquired by an owner here in Kansas. This owner, who I've had the pleasure of becoming friends with, installed a '32 b motor in the wagon.

Shortly after purchasing the woodie, I was very fortunate to locate a set of original doors and belt line in Pennsylvania. The plywood and trim had been replaced incorrectly back in the 1950's, so I have installed new birch panels. I have not yet sourced the maple to create the new trim. I'm also purchasing a passenger rear fender from Connecticut. So, if anyone in that area is coming to Kansas, please let me know. I would love to find a good ride for it.

Well, there's a little background for 'ya.
ro is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-18-2020, 11:47 AM   #3
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

sawzall shared this pic with me. He took it at Hershey in 2011
Attached Images
File Type: jpg 100_0138-vi.jpg (68.8 KB, 112 views)
ro is offline   Reply With Quote
Old 07-18-2020, 11:48 AM   #4
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

These were taken when the car was in CA.
ro is offline   Reply With Quote
Old 07-18-2020, 11:52 AM   #5
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

This is when I bought it. A few pieces were swapped/added along the way.
Attached Images
File Type: jpg 32woody.jpg (220.2 KB, 112 views)
ro is offline   Reply With Quote
Old 07-18-2020, 11:58 AM   #6
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Sponsored Links (Register now to hide all advertisements)
I found some nice original paint on the backside of a hinge. It is the Manilla Brown, suggesting the wagon was an earlier production using leftover '31 paint. BTW, a huge shout out to DavidG for his expertise. I reached out to him early on and he has been great about sharing his knowledge. Thank you, sir. The wagon's "AB" serial number also supports the idea that it was an earlier production.
Attached Images
File Type: jpg 20200608_204449.jpg (200.0 KB, 74 views)
File Type: jpg 20200712_102649.jpg (46.8 KB, 92 views)
ro is offline   Reply With Quote
Old 07-18-2020, 12:02 PM   #7
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

These are the doors as they appear today.
Attached Images
File Type: jpg 20200718_100710.jpg (161.3 KB, 137 views)
ro is offline   Reply With Quote
Old 07-18-2020, 01:45 PM   #8
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Posts: 7,083
Default Re: '32 Woodie "survivoration" project

You're welcome!


Those doors are an incredible find.
DavidG is offline   Reply With Quote
Old 07-19-2020, 10:39 PM   #9
GB SISSON
Senior Member
 
GB SISSON's Avatar
 
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 2,611
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by DavidG View Post
You're welcome!


Those doors are an incredible find.
Pretty much needles in a haystack. They are in excellent condition!
__________________
'47 1/2 ton pickup next project, '47 one ton panel 99% stock nearing completion, '47 2 ton with 8ba and 9' script stakebed, '46 1/2 ton woodie project,'59 F350 9' flareside pickup with cummins 6at. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
GB SISSON is offline   Reply With Quote
Old 07-19-2020, 10:59 PM   #10
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by GB SISSON View Post
Pretty much needles in a haystack. They are in excellent condition!
I feel very grateful, for sure. Credit goes to the previous owner who had the wisdom to hang onto them. They are the guiding force to my decisions. Whatever part I'm sourcing or redoing will need to "look right" with those doors.
ro is offline   Reply With Quote
Old 07-20-2020, 12:02 AM   #11
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,154
Default Re: '32 Woodie "survivoration" project

Hey ro …...I sure do like where this is headed, for what little that's worth! DD
__________________
T5 W/TORQUE TUBE


There are TWO types of people in this world.
___________________________________
1) Those who CAN extrapolate from incomplete data....


V8COOPMAN is offline   Reply With Quote
Old 07-20-2020, 06:51 AM   #12
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 1,895
Default Re: '32 Woodie "survivoration" project

SO.....Ro, question is??? In picture #1 post 4 the cowl and fenders are clearly black with surface rust trough on the some of the metal.....Pic#2 (which I saw on ebay) the car is still black. Pic#3 the car looks to be mostly in "primer" grey?? Unless the lighting has affected that picture?? SO how do we get to what looks like an "original" paint on the cowl, hood and radiator shell in the last picture you posted Pic#4?? Just curious?
rockfla is offline   Reply With Quote
Old 07-20-2020, 07:31 AM   #13
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by rockfla View Post
SO.....Ro, question is??? In picture #1 post 4 the cowl and fenders are clearly black with surface rust trough on the some of the metal.....Pic#2 (which I saw on ebay) the car is still black. Pic#3 the car looks to be mostly in "primer" grey?? Unless the lighting has affected that picture?? SO how do we get to what looks like an "original" paint on the cowl, hood and radiator shell in the last picture you posted Pic#4?? Just curious?
You are correct about the car being in primer. The fenders are still in primer, actually. As for the rest of it, I need any professional painters in the crowd to please not be offended by my unprofessional methods . Primer was removed revealing the aged metal. Fortunately, the primer was only applied as a protector, and the metal had not been heavily worked ahead of that. I matched the paint to the original on the back of the hinge. Here's where it gets unconventional. I applied paint using a brush. When the paint was mostly dry, I coated it with wd40 and rubbed it with my bare hands and fine sandpaper removing any brush strokes. I experimented with coating some places with wd40 before painting which made the paint adhere more randomly, which made for a natural looking paint loss pattern. Once I'm happy with the final look I will protect it with a satin clearcoat.
ro is offline   Reply With Quote
Old 07-20-2020, 10:03 AM   #14
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 1,895
Default Re: '32 Woodie "survivoration" project

Cool.....It's gonna be a nice completed project when you get done. As DavidG said, I am amazed you found the doors for it!!! Good luck with it!!!! Gonna be fun to see it finished!!!
rockfla is offline   Reply With Quote
Old 07-20-2020, 10:08 PM   #15
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by rockfla View Post
Cool.....It's gonna be a nice completed project when you get done. As DavidG said, I am amazed you found the doors for it!!! Good luck with it!!!! Gonna be fun to see it finished!!!
Appreciate the support! Got a ways to go, though, before she's finished :-)
ro is offline   Reply With Quote
Old 07-20-2020, 06:54 AM   #16
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by V8COOPMAN View Post
Hey ro ...I sure do like where this is headed, for what little that's worth! DD
That's actually worth quite a lot. A little encouragement can only help with something like this
ro is offline   Reply With Quote
Old 08-29-2020, 09:00 PM   #17
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Rounded up some headlights and bumper brackets. This car would have had painted headlight buckets originally, so I may end up painting them. I still need to find some old mounting hardware to replace the temporary shiny stuff. Would love to find an original commercial radiator cap out there somewhere.
Attached Images
File Type: jpg IMG_04261.jpg (61.5 KB, 42 views)
ro is offline   Reply With Quote
Old 08-29-2020, 09:17 PM   #18
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,154
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by ro View Post
Rounded up some headlights and bumper brackets. This car would have had painted headlight buckets originally, so I may end up painting them. I still need to find some old mounting hardware to replace the temporary shiny stuff. Would love to find an original commercial radiator cap out there somewhere.
YOUR car, but I wouldn't change those lights for nuthin'! I'm lovin' this thing!! DD
__________________
T5 W/TORQUE TUBE


There are TWO types of people in this world.
___________________________________
1) Those who CAN extrapolate from incomplete data....


V8COOPMAN is offline   Reply With Quote
Old 08-29-2020, 09:31 PM   #19
ro
Member
 
Join Date: Nov 2019
Location: NE Kansas
Posts: 72
Default Re: '32 Woodie "survivoration" project

Quote:
Originally Posted by V8COOPMAN View Post
YOUR car, but I wouldn't change those lights for nuthin'! I'm lovin' this thing!! DD
I love the look of the stainless an awful lot, as well. Besides, I need something to match those pricey old bumper bolts. I can always keep an eye out for another pair of painted lights.
ro is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:44 AM.