Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-27-2016, 11:28 PM   #1
Ramjet47
Member
 
Ramjet47's Avatar
 
Join Date: Apr 2015
Location: Whitsundays, Queensland, Australia.
Posts: 36
Default Tail light loom run 1937 RHD

Does any member have a drawing or a photo of the tail light loom run on a 1937 RHD 5window coup'e, especially in the area of the central chassis cross member box.
Ramjet47
Ramjet47 is offline   Reply With Quote
Old 10-28-2016, 12:24 PM   #2
Anton Voycheck
Member
 
Anton Voycheck's Avatar
 
Join Date: Mar 2016
Location: Laredo, Texas
Posts: 64
Default Re: Tail light loom run 1937 RHD

Tail light harness (or body harness) runs from the headlight switch box junction back along the inside of the frame rail all the way back to the cross member in front of the fuel tank. The harness splits at this point for the opposite taillight and the fuel gauge wire.
Anton Voycheck is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-28-2016, 11:29 PM   #3
Ramjet47
Member
 
Ramjet47's Avatar
 
Join Date: Apr 2015
Location: Whitsundays, Queensland, Australia.
Posts: 36
Default Re: Tail light loom run 1937 RHD

Thanks Anton for your response. I can see how the loom runs along the inner lower horizontal flange of the forward and rearward chassis diagonal cross members but I can't figure out how the loom passes the centre chassis box area. Does it exit the forward chassis diagonal cross member through the hole in the vertical web just rear of the brake and clutch pedal module and then along out side of the centre chassis box and then pass back through the hole on the rear diagonal vertical web behind the brake cross shaft?
Ramjet47 is offline   Reply With Quote
Old 10-29-2016, 01:04 AM   #4
FlatheadTed
Senior Member
 
FlatheadTed's Avatar
 
Join Date: May 2010
Location: Auckland
Posts: 4,691
Send a message via AIM to FlatheadTed
Default Re: Tail light loom run 1937 RHD

Sponsored Links (Register now to hide all advertisements)
Some models run along the x over the rear engine mount ,hooks up to the stop switch then meets the side rail near the kick up .Ted
__________________
http://www.flatheadted.com


Flathead Ted brake Floaters ,
FlatheadTed is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:02 AM.