Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-08-2012, 03:16 PM   #1
mike37cdn
Senior Member
 
Join Date: May 2010
Location: ontario canada
Posts: 128
Default 1951 ford conver overdrive trans removal

i have a 51conver with an overdrive trans can the trans be taken out with out taking out the motor because of the x frame tranny needs two come out oil leaks at the shafts on the tranny thanks
mike37cdn is offline   Reply With Quote
Old 07-08-2012, 03:49 PM   #2
Russ/40
Senior Member
 
Russ/40's Avatar
 
Join Date: May 2010
Location: Santee, California
Posts: 3,505
Default Re: 1951 ford conver overdrive trans removal

No need to remove engine or rear. The cross member comes out.
Russ/40 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-08-2012, 04:22 PM   #3
52merc
Senior Member
 
52merc's Avatar
 
Join Date: May 2010
Location: new zealand
Posts: 1,054
Default Re: 1951 ford conver overdrive trans removal

make sure you take the solenoid out before taking trans out
52merc is offline   Reply With Quote
Old 07-08-2012, 04:44 PM   #4
charles in east texas
Senior Member
 
charles in east texas's Avatar
 
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
Red face Re: 1951 ford conver overdrive trans removal

Sponsored Links (Register now to hide all advertisements)
Have a rag handy to poke in the solenoid hole when you turn it 1/4 turn to take out. Also a good idea to replace the solenoid seal while you have the transmission out. Charles
charles in east texas is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:48 PM.