The Ford Barn

Bob56 · 10-22-2019, 06:21 AM

What is the best way to install a new fuel line (36 Cab) and get the bends correct? Start at the front? Does it run along the frame rail all the way back or pop through one of the holes in the frame support toward the rear of the car

wamnram · 10-22-2019, 08:41 AM

subject discussed previously at:

https://www.fordbarn.com/forum/showt...light=gas+line

Ben38 · 10-22-2019, 12:14 PM

Sponsored Links (Register now to hide all advertisements)

I have the same questions since I'll be installing a new gas line on my '38 standard soon.

Thanks for the link, that's very helpfull.

But I was wondering the same thing - do you start at the front or the back? There's a guy in the V8 Times that sells pre-bent lines. How would you feed a pre-bent line through all the openings?

10-22-2019, 06:21 AM	#1
Bob56 Member Join Date: Jul 2013 Location: Las Vegas, NV Posts: 92	Install fuel line What is the best way to install a new fuel line (36 Cab) and get the bends correct? Start at the front? Does it run along the frame rail all the way back or pop through one of the holes in the frame support toward the rear of the car

10-22-2019, 08:41 AM	#2
wamnram Senior Member Join Date: May 2010 Location: San Tan Valley, Arizona Posts: 210	Re: Install fuel line subject discussed previously at: https://www.fordbarn.com/forum/showt...light=gas+line __________________ Wayne

10-22-2019, 12:14 PM	#3
Ben38 Member Join Date: May 2010 Location: Apple Valley, MN Posts: 61	Re: Install fuel line Sponsored Links (Register now to hide all advertisements) I have the same questions since I'll be installing a new gas line on my '38 standard soon. Thanks for the link, that's very helpfull. But I was wondering the same thing - do you start at the front or the back? There's a guy in the V8 Times that sells pre-bent lines. How would you feed a pre-bent line through all the openings?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode