Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-11-2021, 04:52 PM   #1
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Roof Rail Seals

I'm in the process of replacing all the door and window seals on the '55 Merc and have run into a snag. Being a 1 year only part, nobody repops the roof rail seals. They insert into the roof rails above the side windows and extend from above the vent windows to the upper corners of the quarter windows. Mine are 66 years old and surprisingly still pliable but are distorted and tattered. So my question: has anyone found a suitable substitute for them and if so where did you get it? The same seal would also fit a '55 Vicky. The 56's were different in that they have the flippers over the front side windows.
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Old 05-11-2021, 06:07 PM   #2
JeffB2
Senior Member
 
JeffB2's Avatar
 
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
Default Re: Roof Rail Seals

Maybe call this place they have things other vendors do not carry https://www.restorationspecialties.com/
JeffB2 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-11-2021, 07:11 PM   #3
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Roof Rail Seals

Quote:
Originally Posted by JeffB2 View Post
Maybe call this place they have things other vendors do not carry https://www.restorationspecialties.com/
Thanks, Jeff but I already checked with them; no dice. I ordered a set of seals for a '51 Vic today off eBay to see if I can adapt them. They won't be here until prolly next week. Strikes me as strange that somebody is reproducing 1 year only seals for a '51 but not for a '55. I'm pretty sure Ford sold more '55 Victorias than '51s, but maybe I'm wrong. It's happened before...
__________________
Often wrong but never in doubt.

Last edited by Dobie Gillis; 05-19-2021 at 05:39 PM.
Dobie Gillis is offline   Reply With Quote
Old 05-19-2021, 05:13 PM   #4
TravisDM
Member
 
Join Date: Sep 2020
Posts: 52
Default Re: Roof Rail Seals

Hope you can make those seals work. Update us
TravisDM is offline   Reply With Quote
Old 05-19-2021, 05:37 PM   #5
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Roof Rail Seals

Quote:
Originally Posted by TravisDM View Post
Hope you can make those seals work. Update us
I will update when I get the seals. Right now I think they got hung up on a barb wire fence between Indianapolis and my house. I ordered them on 5/10 and the last tracking update from USPS says:

"May 15, 2021

In Transit, Arriving Late

Your package will arrive later than expected, but is still on its way. It is currently in transit to the next facility."
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Old 05-20-2021, 03:04 PM   #6
Chris S
Junior Member
 
Join Date: Mar 2016
Posts: 12
Default Re: Roof Rail Seals

Sponsored Links (Register now to hide all advertisements)
Dobie,
I replaced the roof rail weatherstrips on my '55 Vicky with ones from Restoration Specialities. It was 10 years ago, but checking back I found the part number was 55VIC, which I think they still sell. Unfortunately my Vicky still leaked a little bit after fitting them. I think it was my own fault, being an extrusion and not a moulded strip you have to shape them above the vent window and I think I shaved off a little more than I should.
Chris
Chris S is offline   Reply With Quote
Old 05-20-2021, 03:38 PM   #7
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Roof Rail Seals

Thanks, Chris, I'll check them out again if the '51 Vic seals don't pan out.
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Old 05-20-2021, 08:49 PM   #8
TravisDM
Member
 
Join Date: Sep 2020
Posts: 52
Default Re: Roof Rail Seals

Quote:
Originally Posted by Dobie Gillis View Post
I will update when I get the seals. Right now I think they got hung up on a barb wire fence between Indianapolis and my house. I ordered them on 5/10 and the last tracking update from USPS says:

"May 15, 2021

In Transit, Arriving Late

Your package will arrive later than expected, but is still on its way. It is currently in transit to the next facility."
That was 5 days ago. Deliveries are slower around here either.
TravisDM is offline   Reply With Quote
Old 05-31-2021, 03:58 PM   #9
Antiquer
Junior Member
 
Join Date: Feb 2013
Location: Carthage, Missouri
Posts: 13
Default Re: Roof Rail Seals

'54 Mercury seals doesn't have a flipper might work.
Antiquer is offline   Reply With Quote
Old 05-31-2021, 05:56 PM   #10
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Roof Rail Seals

I'll have a look. I contacted Concours Parts about '54 Vic seals which would be the same as a ''54 Merc. They said they would not work for a '55 Ford or Merc but I'm not sure they know. The '51 Vic seals are too wide to fit in the rail. I've been looking at Steele Rubber universal seals. They show the shape and dimensions on their website. A couple look promising but not an exact fit without modification.
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Old 09-14-2021, 01:21 PM   #11
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Roof Rail Seals

Update. I found a universal seal at Rubber the Right Way that works even though it's not the same shape as the originals. It's a "D" shaped hollow extrusion with peel and stick backing. The sticky side fits in the rail channel with a little tucking with one of those nylon trim tools. I'm a little leery of peel and stick but the adhesive is really aggressive on these so I'm hoping they'll hold. If they start to come loose I can always glue 'em with trim adhesive. I hope this helps someone else with a '55 Vic or Merc needing roof rail seals.

https://www.rubbertherightway.com/ex...-15692-ctg.htm
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:58 PM.