|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-06-2021, 06:49 PM | #1 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Roadster Door Hinge Screws
I need several of the screws that hold the door hinge to the car body. The screws I’ve bought from vendors don’t fit. Does anyone know what size these screws are ? There are three screws on each hinge.
Thanks - Jim |
01-06-2021, 09:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: Roadster Door Hinge Screws
Need to know what year roadster,
1928-1929 roadsters use 1-4-28 for door hinge to cowl 1930-1931 roadsters use 5/16-24 for door hinge to cowl Steve |
Sponsored Links (Register now to hide all advertisements) |
|
01-07-2021, 09:47 AM | #3 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Re: Roadster Door Hinge Screws
Steve - thanks - the car is a ‘31 roadster.
Jim |
01-07-2021, 10:06 AM | #4 |
Senior Member
Join Date: May 2010
Location: Plano, Texas
Posts: 840
|
Re: Roadster Door Hinge Screws
got mine from Brattons and they fit fine.
|
01-07-2021, 03:22 PM | #5 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Roadster Door Hinge Screws
If you got the screws from a reputable supplier and for the correct year, make sure the holes were not re-tapped for different thread or cross threaded. If you have the old ones that came out, check the thread count.
__________________
I know the voices aren't real but damn they have some good ideas! |
01-07-2021, 03:35 PM | #6 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Re: Roadster Door Hinge Screws
Sponsored Links (Register now to hide all advertisements)
|
01-07-2021, 06:36 PM | #7 |
Senior Member
Join Date: Feb 2013
Location: New Brunswick, Canada
Posts: 480
|
Re: Roadster Door Hinge Screws
Just did the hinges on my 31 Roadster a short time ago. Used some original screws and some new ones from Bratton's and they worked fine. Make sure you use the cup washers and internal lock washers as well.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|