|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-01-2019, 04:10 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Atlanta GA
Posts: 505
|
3 bolt-2 bolt dizzy adapter parts
I have a 3 bolt to 2 bolt dizzy adapter on my 39 motor so I can run the 2 bolt crab dizzy. I have just swapped out one intake for another, and I need to make the vacuum brake plumbing hook up since the intake port is in a different place. WHERE on EARTH can I get the little brass fittings to complete this connection WITHOUT having to buy another complete adapter?
|
08-01-2019, 04:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,361
|
Re: 3 bolt-2 bolt dizzy adapter parts
We have the little brass fittings that go on the end of the vacuum tubing. It slides on to the fresh tube then compresses onto it when tightened down. I forgot the thread size but we just got a supply of them in. Call our sales office Monday if you still need some.
__________________
VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com |
Sponsored Links (Register now to hide all advertisements) |
|
08-01-2019, 06:35 PM | #3 |
Member
Join Date: Feb 2013
Location: Rancho Cordova, Ca.
Posts: 56
|
Re: 3 bolt-2 bolt dizzy adapter parts
Sacramento Vintage Ford, but VP is a bit closer!! Line with banjo fitting is no longer available from us.
https://www.vintageford.com/word_sea...CUUM&Category= |
08-01-2019, 11:11 PM | #4 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: 3 bolt-2 bolt dizzy adapter parts
If you look up "ford nut" I think any NAPA that has Weatherhead brand fittings would have what you want. It is a compression nut that the taper on the end takes the place of a ferrule used on modern compression fittings. C&G, Carpenter and Drake I think stock them.
|
08-01-2019, 11:35 PM | #5 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 3 bolt-2 bolt dizzy adapter parts
Ford also used three different varieties of the fitting in question. One variety had the same hole size but accepted a 1/2” wrench versus a 7/16”. There was another variety used only in wiper motor tube connections
Personally I feel as though the vacuum brake vacuum is not needed on today’s octane level fuels. I still run the tube for looks but plug off the inside of it |
08-02-2019, 12:53 PM | #6 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: 3 bolt-2 bolt dizzy adapter parts
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|