Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-11-2024, 09:20 AM   #21
Zax40
Senior Member
 
Zax40's Avatar
 
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 374
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

IIRC tightening, or shortening the drag link should rotate the steering wheel to the left.
Zax40 is online now   Reply With Quote
Old 09-11-2024, 10:56 AM   #22
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,251
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

Not sure if this will help but, here's what the drag link and tie rod set up looks like on my 40. To center my steering wheel, I adjusted the drag link that attaches to the splined steering arm part # 11A 3590-A that attaches to the steering box.
Attached Images
File Type: jpg IMG_0196b.jpg (73.5 KB, 19 views)
File Type: jpg IMG_0197b.jpg (74.0 KB, 20 views)
File Type: jpg IMG_0199b.jpg (87.9 KB, 18 views)
File Type: jpg IMG_0214b.jpg (84.4 KB, 18 views)
File Type: jpg IMG_3022b.jpg (64.3 KB, 18 views)
File Type: jpg IMG_3023b.jpg (56.9 KB, 17 views)
File Type: jpg IMG_3025b.jpg (59.0 KB, 17 views)
File Type: jpg IMG_3028b.jpg (73.1 KB, 16 views)
File Type: jpg IMG_3031b.jpg (60.9 KB, 11 views)
File Type: jpg IMG_3032b.jpg (70.0 KB, 10 views)
File Type: jpg IMG_3034b.jpg (72.3 KB, 10 views)
File Type: jpg IMG_3035b.jpg (64.3 KB, 9 views)
File Type: jpg IMG_3036b.jpg (56.8 KB, 11 views)

Last edited by 19Fordy; 09-11-2024 at 11:08 AM.
19Fordy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-11-2024, 11:56 AM   #23
glennpm
Senior Member
 
glennpm's Avatar
 
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 2,329
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

Quote:
Originally Posted by std1940 View Post
Kube, Mike,
I have tried turning in both directions and can’t get the steering wheel in the sweet spot.
You are limited because of spindle orientation .
Turning the tie rod to where the steering would be centered makes it impossible to attach to spindle.
Thanks Tom.

Tom, I'd buy the one from Joe's and with it you will have fine adjustment. As Mart points out, without the sleeve, you have to make a full 360° rotation only, which isn't get you centered. If you have a show car stay with what you have but if you're driving it, and the wheel is driving you crazy, get one with the adjustable sleeve.



https://www.joesantiqueauto.com/drag-link-11y-3306
__________________
Archives of historical but relevant older articles:
-------------
Hover mouse over the links below and click!
~~~~~~~~~~~~~~~~~---------------
Rumble Seat's Notes
Techno-Source-for-the-1932-thru-1953-Flathead-Ford
glennpm is offline   Reply With Quote
Old 09-11-2024, 03:22 PM   #24
Zax40
Senior Member
 
Zax40's Avatar
 
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 374
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

I found my notes were still on my work bench from when I replaced my drag link a couple weeks ago. My old drag link when removed (steering was centered) was 32 9/16 when measuring from the outside of the lube fitting to outside of lube fitting on far end. This won't be exact for every 40 Ford but it might help get you in the ball park.
Zax40 is online now   Reply With Quote
Old 09-11-2024, 03:26 PM   #25
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,276
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

Quote:
Originally Posted by std1940 View Post
Kube, Mike,
I have tried turning in both directions and can’t get the steering wheel in the sweet spot.
You are limited because of spindle orientation .
Turning the tie rod to where the steering would be centered makes it impossible to attach to spindle.
Thanks Tom.
Post #20 is spot on with that advice. It sometimes takes me three times to get it right.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is offline   Reply With Quote
Old 09-11-2024, 06:14 PM   #26
std1940
Senior Member
 
std1940's Avatar
 
Join Date: Aug 2010
Location: nh
Posts: 111
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

Sponsored Links (Register now to hide all advertisements)
I would like to thank everyone for their ideas,advice guidance and suggestions!
Tom.
std1940 is offline   Reply With Quote
Old 09-14-2024, 07:41 AM   #27
Gene1949
Senior Member
 
Gene1949's Avatar
 
Join Date: Jun 2016
Location: Pahrump, NV
Posts: 413
Default Re: 1940 Ford Coupe wheel alignment and steering wheel centering

find another alignment shop.
Gene1949 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:14 AM.