Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-25-2023, 03:38 PM   #1
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
Default A new thread!! Firestone Bias Ply Tires

A year ago my local guys I support ordered a set of Goodyear tires for my 1938 Convertible Club Coupe(white walls of course). After many months of waiting and checking they still haven't arrived and the supplier(I think, Lucas Classic Tires) do not even show them to be available). My question is in the last YEAR! has anyone used Firestone Bias Ply tires through Speedway and what are your opinions! These are I believe from Coker Tires so please inform myself and others as to their quality. Thanks in advance.
GaryU.

And yes we've checked every few months about them!
GaryU. is offline   Reply With Quote
Old 01-25-2023, 03:42 PM   #2
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,937
Default Re: A new thread!! Firestone Bias Ply Tires

Gary, keep in mind that Coker nor Speedway, etc. are making the tires. So, it doesn't matter where you buy them from, they are coming from the same factory.
I have installed a number of sets of Firestone and have been quite pleased.
Tubes? Modern tubes have been "okay" at very best. I've had a couple that were so bad as to make it impossible to balance the wheel / tire. Yes, the tubes were the culprits as hard as that was for me to believe.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-25-2023, 03:54 PM   #3
OldGold360
Senior Member
 
Join Date: Nov 2020
Location: SW WA
Posts: 639
Default Re: A new thread!! Firestone Bias Ply Tires

I just bought a set of 600-16. I will probably have them mounted in a week or two and will let you know if I have any issues. In the past, all mine have been fine. Like Kube said, sometimes balancing is an issue but I never bothered to determine if it is the tire or the tube.
OldGold360 is offline   Reply With Quote
Old 01-25-2023, 04:04 PM   #4
36and63
Senior Member
 
36and63's Avatar
 
Join Date: Jul 2013
Location: Wisconsin
Posts: 212
Default Re: A new thread!! Firestone Bias Ply Tires

I have bought 3 sets over the past 6 or 7 years with no issues. I’ve not had any balance issues as well. I have a set on wide 5’s another set on 35 wires and another set on 40 steelies. Can’t beat the free shipping from Speedway either.


Pat
36and63 is offline   Reply With Quote
Old 01-25-2023, 11:01 PM   #5
Fordbuilder
Junior Member
 
Join Date: Oct 2018
Location: Nashville
Posts: 24
Default Re: A new thread!! Firestone Bias Ply Tires

i have a set from Coker and they run pretty well. Get a little vibration from them even when balanced but have heard a few people say I should have them shaved.
Fordbuilder is offline   Reply With Quote
Old 01-25-2023, 11:09 PM   #6
Ken/Alabama
Senior Member
 
Ken/Alabama's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 3,237
Default Re: A new thread!! Firestone Bias Ply Tires

Sponsored Links (Register now to hide all advertisements)
I have the Firestones on two of my 40s. No problem with them.
Ken/Alabama is offline   Reply With Quote
Old 01-25-2023, 11:36 PM   #7
Flathead Fever
Senior Member
 
Flathead Fever's Avatar
 
Join Date: May 2010
Location: Yucaipa, CA
Posts: 1,091
Default Re: A new thread!! Firestone Bias Ply Tires

I've bought a few Firestones sets and they have always balanced using little weight. Not very much side to side runout watching them spin on the balancer. I bought a used Coats tire machine and a Snap-On computerized balancer. Have the shop center the Firestone name with the valve stem and then center the hub cap too. That's the way my dad always did them, looks real nice.
Flathead Fever is offline   Reply With Quote
Old 01-26-2023, 02:01 AM   #8
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
Default Re: A new thread!! Firestone Bias Ply Tires

Thanks for comments. Had logo of the Goodyears on my pickup centered 2 years ago like that!! My local guys said it was the first time anyone had asked for that! If you look at old Ford drawings they show the Firestone tires with the logo centered on the valve stems.
GaryU. is offline   Reply With Quote
Old 01-26-2023, 09:52 AM   #9
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,937
Default Re: A new thread!! Firestone Bias Ply Tires

Quote:
Originally Posted by Flathead Fever View Post
I've bought a few Firestones sets and they have always balanced using little weight. Not very much side to side runout watching them spin on the balancer. I bought a used Coats tire machine and a Snap-On computerized balancer. Have the shop center the Firestone name with the valve stem and then center the hub cap too. That's the way my dad always did them, looks real nice.
The new tires have a small painted dot to mark the "heavy" side. That typically is placed 180° from the valve stem.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is online now   Reply With Quote
Old 01-26-2023, 09:52 AM   #10
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,937
Default Re: A new thread!! Firestone Bias Ply Tires

Quote:
Originally Posted by GaryU. View Post
Thanks for comments. Had logo of the Goodyears on my pickup centered 2 years ago like that!! My local guys said it was the first time anyone had asked for that! If you look at old Ford drawings they show the Firestone tires with the logo centered on the valve stems.
Gary, that's a drawing... NOT reality.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is online now   Reply With Quote
Old 01-26-2023, 11:42 AM   #11
Bill OH
Senior Member
 
Join Date: May 2010
Posts: 423
Default Re: A new thread!! Firestone Bias Ply Tires

I have Diamond Back 600R16s on wide 5s @40lbs pressure - handles and rides better. No
more bias ply!!!
Bill OH is offline   Reply With Quote
Old 01-26-2023, 01:19 PM   #12
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: A new thread!! Firestone Bias Ply Tires

Unless you have a show car and a nice trailer, radials have it all over bias plies. If you drive your car, in my opinion there is really no choice.
tubman is offline   Reply With Quote
Old 01-26-2023, 02:01 PM   #13
Krylon32
Senior Member
 
Join Date: May 2010
Posts: 4,430
Default Re: A new thread!! Firestone Bias Ply Tires

Another vote for Diamond Back. As for tubes after some bad experience with tubes from Coker with no tech help I just have my local tire store industrial tubes which have worked out good
Krylon32 is offline   Reply With Quote
Old 01-26-2023, 03:50 PM   #14
highbeams
Senior Member
 
highbeams's Avatar
 
Join Date: Dec 2014
Location: California
Posts: 792
Default Re: A new thread!! Firestone Bias Ply Tires

17" X 500-525 Firestone black wall diamond treads availability?

Thank you.
highbeams is offline   Reply With Quote
Old 01-26-2023, 03:59 PM   #15
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
Default Re: A new thread!! Firestone Bias Ply Tires

Thanks for all the advice. If using the Diamond Back radials do you use tubes with them as well. I apologize because this has probably been discussed before but want to get the real scoop. I loved Kube's comment on drawings versus reality.
GaryU. is offline   Reply With Quote
Old 01-26-2023, 06:00 PM   #16
JayChicago
Senior Member
 
JayChicago's Avatar
 
Join Date: Jan 2019
Location: Chicago
Posts: 711
Default Re: A new thread!! Firestone Bias Ply Tires

Quote:
Originally Posted by GaryU. View Post
If using the Diamond Back radials do you use tubes with them as well.
The radials are tubeless tires. Many have used them this way.

Not me. I didn't trust the rims of my old wheels to provide a good sealing surface. Didn't want to get to my storage garage and find a flat from a slow rim leak. "Radial tubes" recommended. (heavy-duty tube, designed to stand up to the flexing inside a radial tire) Extra cost of tubes is small compared to outrageous cost of bias-look radials tires.
JayChicago is offline   Reply With Quote
Old 01-27-2023, 10:33 AM   #17
flathead4rd
Senior Member
 
flathead4rd's Avatar
 
Join Date: May 2010
Location: Michigan
Posts: 501
Default Re: A new thread!! Firestone Bias Ply Tires

I mounted many new tires in my day and the red dot goes to the valve stem. This was before there were tubeless tires and after the tubeless tires became popular. That's the way Kelly tires did it.
flathead4rd is offline   Reply With Quote
Old 01-27-2023, 07:34 PM   #18
OldGold360
Senior Member
 
Join Date: Nov 2020
Location: SW WA
Posts: 639
Default Re: A new thread!! Firestone Bias Ply Tires

It sounds funny to me to hear some folks say they prefer a radial tire because it produces a better ride on their 90 year old vehicle.
OldGold360 is offline   Reply With Quote
Old 01-27-2023, 10:18 PM   #19
ssffnomad
Senior Member
 
ssffnomad's Avatar
 
Join Date: Aug 2021
Location: Upstate N.Y.
Posts: 435
Default Re: A new thread!! Firestone Bias Ply Tires

Not if you drive past your local ☕️ Shop. And put 100-200 miles on a day .
Night and Day difference for a guy that drives his ride.
Stretch
ssffnomad is offline   Reply With Quote
Old 01-28-2023, 01:30 AM   #20
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: A new thread!! Firestone Bias Ply Tires

Plus the handling is better. When I had bias-plies, every highway cloverleaf was an adventure; now it's easy.
tubman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:10 PM.