The Ford Barn

vonpahrkur · 10-26-2017, 08:04 PM

V8 60 parts, priced individually. All new or rebuilt parts to build an engine. I can do a little better if someone wants several things. message me with offers and questions, thanks

New Offy heads with water manifolds SOLD
new water pump internals with housing/cradle mount SOLD
Winfield 3/4 cam reground ready to go with new Timing gear SOLD
New adjustable liftersSOLD
distributor adapter to run a crab style distributor SOLD
Flywheel surfaced, has new clutch and pressure plate SOLD

New 60 over Egge pistons with pins and new rings $425
Rods with new bushings and bearing $400
New bearing set $165
Polished crankshaft with new gear $270
new best gasket set $180
nice crank pulley $40
decent used Spark plug wire tubes $50
water pump housing/front cradle mount $80
used stock lifters $85
valves and springs $175

3- V8 60 blocks:
one 1937 tin-side block. $250
one 1938-1939 iron side block with cam $350
one 1940 block with cam $350
one fully machined 1939 iron-side block with new cam bearings installed (needs repair in an exhaust port) $550
Stock crankshaft needs cleaned up $120

3-stock oil pans-$80 each
2 modified oil pan (holds additional oil, likely from an old race car) $110

Will make a package deal if someone wants to buy everything!

Also have a v8-60 truck transmission case available (top shift trans that takes 39 internals) $250

10-26-2017, 08:04 PM	#1
vonpahrkur Senior Member Join Date: Jul 2010 Posts: 480	V860 parts stash extravaganza-individually priced City: Bakersfield State: CA Price: in ad V8 60 parts, priced individually. All new or rebuilt parts to build an engine. I can do a little better if someone wants several things. message me with offers and questions, thanks New Offy heads with water manifolds SOLD new water pump internals with housing/cradle mount SOLD Winfield 3/4 cam reground ready to go with new Timing gear SOLD New adjustable liftersSOLD distributor adapter to run a crab style distributor SOLD Flywheel surfaced, has new clutch and pressure plate SOLD New 60 over Egge pistons with pins and new rings $425 Rods with new bushings and bearing $400 New bearing set $165 Polished crankshaft with new gear $270 new best gasket set $180 nice crank pulley $40 decent used Spark plug wire tubes $50 water pump housing/front cradle mount $80 used stock lifters $85 valves and springs $175 3- V8 60 blocks: one 1937 tin-side block. $250 one 1938-1939 iron side block with cam $350 one 1940 block with cam $350 one fully machined 1939 iron-side block with new cam bearings installed (needs repair in an exhaust port) $550 Stock crankshaft needs cleaned up $120 3-stock oil pans-$80 each 2 modified oil pan (holds additional oil, likely from an old race car) $110 Will make a package deal if someone wants to buy everything! Also have a v8-60 truck transmission case available (top shift trans that takes 39 internals) $250 __________________ Looking for original 1932 3-window coupe parts to complete my project. Also looking for 1936 ford roadster body /parts. Lots of 1941 Mercury convertible parts for sale. Last edited by vonpahrkur; 02-04-2021 at 05:29 PM.