|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-20-2011, 08:32 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 825
|
Loose Tank Baffle
The gas tank baffle over the steering column bracket is loose, and causes a very annoying vibration at certain RPM's. I can stop it by pushing up on steering wheel, and no, it is not looseness in the bracket. Anybody know of a quick fix, removing the tank is not an option. Any half-baked solution considered. Thanx.
|
07-20-2011, 09:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Loose Tank Baffle
Install the dash rail bracket, then jam some rubber on the upper half of the gas tank bracket to put pressure up on the tank bottom.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-22-2011, 09:51 AM | #3 |
Senior Member
Join Date: May 2010
Location: Chandler, AZ./Eagle Rock, MO.
Posts: 108
|
Re: Loose Tank Baffle
I recall reading on this site about someone using a large magnet.
|
07-22-2011, 11:04 AM | #4 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Loose Tank Baffle
Sponsored Links (Register now to hide all advertisements)
Paul in CT |
|
|
Sponsored Links (Register now to hide all advertisements) |
|