|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
01-25-2020, 01:43 PM
|
#1 |
|
Senior Member
Join Date: Sep 2016
Location: Long Island
Posts: 172
|
Bellhouse hardware
It seems I've neglected to find hardware for my tranmission bellhouse. Can someone clue me in to the the bolt size? Is this a specific Ford hardware?
|
|
|
|
01-25-2020, 02:42 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Bellhouse hardware
are you refering to the bolts that hoold the transmission to the bellhouse or the bolts that hold the bellhouse to the flywheel cover???
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-25-2020, 02:50 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Bellhouse hardware
bell housing to flywheel housing 3/8 X 1" NC, bell housing to transmission 7/16 X 1" NC I could be a little off on the length.
|
|
|
|
|
01-25-2020, 04:01 PM
|
#4 |
|
Senior Member
Join Date: Sep 2016
Location: Long Island
Posts: 172
|
Re: Bellhouse hardware
Thanks guys. I needed the hardware for both.
|
|
|
|
|
01-25-2020, 10:33 PM
|
#5 |
|
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Bellhouse hardware
The bellhouse to Transmissions bolts are 1/2" dia x 1 1/4" long with a head that takes a 3/4" wrench.
The bellhouse to flywheel cover bolts are 3/8" dia x 1 1/4" long and the head takes a 9/16" wremch and there (I think) twelve of them. The original head had a dome on it. ken |
|
|
|
|
01-25-2020, 10:39 PM
|
#6 |
|
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Bellhouse hardware
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
01-26-2020, 11:25 AM
|
#7 |
|
Senior Member
Join Date: Feb 2014
Location: Lake Mills, WI
Posts: 251
|
Re: Bellhouse hardware
You can try www.fordbolts.com
__________________
Always one bad decision away from a good time. |
|
|
|
|
01-26-2020, 11:31 AM
|
#8 |
|
Senior Member
Join Date: May 2010
Posts: 2,592
|
Re: Bellhouse hardware
wrong post
|
|
|
|
|
01-26-2020, 12:35 PM
|
#9 |
|
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Bellhouse hardware
The four bellhousing to transmission bolts are Grade 5 (three marks on the head).
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:05 PM.