|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-04-2012, 06:20 PM | #1 |
Junior Member
Join Date: May 2010
Posts: 4
|
Inner headlight ring
Has anyone replaced the inner rings? They were spot welded originally, but this looks like it would be hard to do. Has anyone tried epoxy?
|
04-04-2012, 06:32 PM | #2 |
Senior Member
Join Date: May 2010
Location: santa cruz, calif
Posts: 2,011
|
Re: Inner headlight ring
drill small holes in the ring where you want the welds. MIG or TIG the mating surfaces starting on the base through the holes and up through the ring. Grind it flat if you build it up too far.
Are you related to Bruce and Jean? |
Sponsored Links (Register now to hide all advertisements) |
|
04-04-2012, 09:22 PM | #3 |
Junior Member
Join Date: May 2010
Posts: 4
|
Re: Inner headlight ring
Thanks Pat, I will try that.
I do have a cousin in Santa Ana that is Donna Jean Ariss, but that was her maiden name. Her husband died a couple of years ago. |
04-05-2012, 07:35 AM | #4 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Inner headlight ring
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|