Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-27-2020, 10:15 PM   #1
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Electrical schematic request - 41 Convt. electric top

All,

Can anyone assist? I'm looking for a wiring schematic for a 41 Ford electric convertible top.

This is not a hydraulic pump/ram system like later models. There is a motor either side operating a screw jack assembly.

I understand these are shunt wired motors and I should be able to figure this, but I thought I'd ask here before diving in.

Any assistance appreciated.
fortyonerag is offline   Reply With Quote
Old 02-27-2020, 11:12 PM   #2
G.M.
Senior Member
 
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,370
Default Re: Electrical schematic request - 41 Convt. electric top

Try Electro Hydraulics in Punta Gorda,Fl. They provide wiring,
motors and parts for Ford convertible tops. G.M.
__________________
www.fordcollector.com
G.M. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-28-2020, 09:59 PM   #3
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

Will do, many thanks
fortyonerag is offline   Reply With Quote
Old 02-28-2020, 11:45 PM   #4
G.M.
Senior Member
 
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,370
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by fortyonerag View Post
Will do, many thanks
It's Hydro-E-Lectric G.M.
__________________
www.fordcollector.com
G.M. is offline   Reply With Quote
Old 02-29-2020, 02:19 PM   #5
supereal
Senior Member
 
supereal's Avatar
 
Join Date: Jul 2014
Location: Iowa
Posts: 1,472
Default Re: Electrical schematic request - 41 Convt. electric top

Get a copy of the 1939-48 Ford/Mercury shop manual If you own a vehicle from those years, you need this book It has extensive info on the Auto-Lite electric top. Order from C&G at 800/266-0470. Order the printed version V-222, or the CD version CD-39-48, which is less expensive. The electric top was a one year model in 1941, and replaced the earlier vacuum version in previous years. The electric top was difficult to adjust, as the motors tended to get out of sync. This problem survived in the later retractable hard top, and spelled the end of that type when service became an expensive matter.
supereal is offline   Reply With Quote
Old 02-29-2020, 10:43 PM   #6
41ford1
Senior Member
 
41ford1's Avatar
 
Join Date: May 2010
Location: ManchVegas, New Hampshah
Posts: 1,573
Default Re: Electrical schematic request - 41 Convt. electric top

Sponsored Links (Register now to hide all advertisements)
I have those manuals on CD. They do NOT show the wiring for the '41 convertible top.
__________________
You are never to old to enjoy your childhood.

Forty1fordpickup on the HAMB.
41ford1 is offline   Reply With Quote
Old 03-01-2020, 12:31 PM   #7
slowforty
Senior Member
 
slowforty's Avatar
 
Join Date: May 2010
Location: Tinley Park Ill
Posts: 745
Default Re: Electrical schematic request - 41 Convt. electric top

Try Classic Car Wiring .Com
slowforty is offline   Reply With Quote
Old 03-01-2020, 05:27 PM   #8
41ford1
Senior Member
 
41ford1's Avatar
 
Join Date: May 2010
Location: ManchVegas, New Hampshah
Posts: 1,573
Default Re: Electrical schematic request - 41 Convt. electric top

If you have access to 1935 to 1952 Motors Auto Repair manual there is some information there. The info is quite basic. it does have a diagram showing switch and breaker locations. PM me if you want it. I can scan the info for you.
__________________
You are never to old to enjoy your childhood.

Forty1fordpickup on the HAMB.
41ford1 is offline   Reply With Quote
Old 03-02-2020, 06:27 PM   #9
supereal
Senior Member
 
supereal's Avatar
 
Join Date: Jul 2014
Location: Iowa
Posts: 1,472
Default Re: Electrical schematic request - 41 Convt. electric top

My 39-48 shop manual does have the wiring diagram.. Send me a personal message on the site and I'll scan it for you.
supereal is offline   Reply With Quote
Old 03-06-2020, 02:17 AM   #10
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

PM's sent. Many thanks, supereal and 41ford1.

I have the Ford 1932-1941 shop manual, the 41 Super Deluxe owners booklet and the EFV8 book. All great reference texts, but none with the convertible top schematic I need for the 41.

It would be easy if the 41 used a hydro electric system (I have a schematic for this) instead of two screw jack motors.

P.S. Hydro-E-Lectric had no data but were kind enough to respond, for which I thank them.

Many thanks for the assistance.

Last edited by fortyonerag; 03-06-2020 at 02:41 AM.
fortyonerag is offline   Reply With Quote
Old 03-07-2020, 10:07 AM   #11
Merc Cruzer
Senior Member
 
Merc Cruzer's Avatar
 
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 1,438
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by fortyonerag View Post
PM's sent. Many thanks, supereal and 41ford1.

I have the Ford 1932-1941 shop manual, the 41 Super Deluxe owners booklet and the EFV8 book. All great reference texts, but none with the convertible top schematic I need for the 41.

It would be easy if the 41 used a hydro electric system (I have a schematic for this) instead of two screw jack motors.

P.S. Hydro-E-Lectric had no data but were kind enough to respond, for which I thank them.

Many thanks for the assistance.
Just wondering, in 53', the Mercury used two screw jacks and a single motor. How similar were the systems?
Attached Images
File Type: jpg DSCN5004.jpg (64.4 KB, 21 views)
File Type: jpg DSCN8811.jpg (56.2 KB, 25 views)
File Type: jpg DSCN7760.jpg (54.6 KB, 19 views)
Merc Cruzer is offline   Reply With Quote
Old 03-08-2020, 07:00 PM   #12
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by Merc Cruzer View Post
Just wondering, in 53', the Mercury used two screw jacks and a single motor. How similar were the systems?
Many thanks for the schematic. The 41 is different to the 54 in that it has no control relays that I can see. One switch (many terminals) and two motors.

Quite a few big wires. I'll just get off my slack backside and ring the circuit out I guess.
fortyonerag is offline   Reply With Quote
Old 03-14-2020, 12:49 AM   #13
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by Merc Cruzer View Post
Just wondering, in 53', the Mercury used two screw jacks and a single motor. How similar were the systems?
From what I can see, the systems looks very similar, but the 41 has two motors of course. What threw me was that the system installed in my car has no relays, just a large multi pole switch.
fortyonerag is offline   Reply With Quote
Old 03-14-2020, 01:25 PM   #14
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 1,987
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by fortyonerag View Post
From what I can see, the systems looks very similar, but the 41 has two motors of course. What threw me was that the system installed in my car has no relays, just a large multi pole switch.

I can assure you that there are no relays in the original '41 electric lift system.
The '41 system in my '36 is a dead stock unit, all of the wires are still contained within the original fabric covered loom.
None of the original wires have ever been removed/disturbed from the original Ford switch.
__________________
Bill.... 36 5 win cpe
blucar is offline   Reply With Quote
Old 03-14-2020, 05:33 AM   #15
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

Duplicate post
fortyonerag is offline   Reply With Quote
Old 03-06-2020, 05:08 PM   #16
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 11,952
Default Re: Electrical schematic request - 41 Convt. electric top

The 1939 to 1948 green cover Service Manual used reprint material from a Canadian Ford training shop manual and has a lot of information the plain Ford manuals didn't have. It covers Ford & Mercury cars & trucks. The Autolite electric top info is in there. Reprints of these are not as good as the originals unless a digital copy is taken from an original but they aren't bad.
rotorwrench is offline   Reply With Quote
Old 03-07-2020, 04:07 AM   #17
fortyonerag
Senior Member
 
fortyonerag's Avatar
 
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 316
Default Re: Electrical schematic request - 41 Convt. electric top

Worth knowing. Many thanks.
fortyonerag is offline   Reply With Quote
Old 03-07-2020, 01:12 PM   #18
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 11,952
Default Re: Electrical schematic request - 41 Convt. electric top

The 1941 Autolite system had just the two separate motors. They were problematic when one motor would run faster than the other which is a characteristic of any worn electric motor. Due to these problems, the system was short lived.

A lot of later convertible electric actuator systems used those dual drives off of a single motor to solve the speed differential problem but it seems all of them can be problematic at times. The more complex the system, the more possibilities of problems.
rotorwrench is offline   Reply With Quote
Old 03-07-2020, 01:39 PM   #19
Merc Cruzer
Senior Member
 
Merc Cruzer's Avatar
 
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 1,438
Default Re: Electrical schematic request - 41 Convt. electric top

Quote:
Originally Posted by rotorwrench View Post
The 1941 Autolite system had just the two separate motors. They were problematic when one motor would run faster than the other which is a characteristic of any worn electric motor. Due to these problems, the system was short lived.

A lot of later convertible electric actuator systems used those dual drives off of a single motor to solve the speed differential problem but it seems all of them can be problematic at times. The more complex the system, the more possibilities of problems.
This system only lasted a year and a half and then they went back to hydraulic cylinders.
Merc Cruzer is offline   Reply With Quote
Old 03-10-2020, 09:28 PM   #20
41ford1
Senior Member
 
41ford1's Avatar
 
Join Date: May 2010
Location: ManchVegas, New Hampshah
Posts: 1,573
Default Re: Electrical schematic request - 41 Convt. electric top

I am attaching the scans from the Motors Manual here. I hope these help on your project.
Attached Files
File Type: pdf Motors conv top 1.pdf (1.91 MB, 23 views)
File Type: pdf Motors conv top 2.pdf (1.87 MB, 17 views)
__________________
You are never to old to enjoy your childhood.

Forty1fordpickup on the HAMB.
41ford1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:58 AM.