The Ford Barn

39flyer · 01-18-2021, 03:44 PM

Is there a replacement bushing used when replacing the rear end drive gear as well as for the right differential case? None is shown in the parts manual.

alchemy · 01-18-2021, 05:58 PM

Bushing? On the R&P?

Terry,OH · 01-19-2021, 07:16 AM

There are bearings and races, for the pinion gear as well as in the axle housing for the carrier. No bushing in the rear axle I am aware of at this time.

rotorwrench · 01-19-2021, 04:33 PM

Sponsored Links (Register now to hide all advertisements)

The Timkens are available but the one on the pinion tip is a bit harder to source of good quality (18-4625-A). The differential spider gears don't have bushings since their movement is more limited. Repair bushings for the wheel hub bearing races are available but they are not easy to fit.

01-18-2021, 03:44 PM	#1
39flyer Senior Member Join Date: Aug 2014 Location: Oshkosh, WI Posts: 107	Drive gear bushing. Is there a replacement bushing used when replacing the rear end drive gear as well as for the right differential case? None is shown in the parts manual.

01-18-2021, 05:58 PM	#2
alchemy Senior Member Join Date: May 2010 Location: middle of Iowa Posts: 646	Re: Drive gear bushing. Bushing? On the R&P?

01-19-2021, 07:16 AM	#3
Terry,OH Senior Member Join Date: May 2010 Posts: 4,743	Re: Drive gear bushing. There are bearings and races, for the pinion gear as well as in the axle housing for the carrier. No bushing in the rear axle I am aware of at this time.

01-19-2021, 04:33 PM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,425	Re: Drive gear bushing. Sponsored Links (Register now to hide all advertisements) The Timkens are available but the one on the pinion tip is a bit harder to source of good quality (18-4625-A). The differential spider gears don't have bushings since their movement is more limited. Repair bushings for the wheel hub bearing races are available but they are not easy to fit.