|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-27-2019, 12:09 PM | #1 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Rotella T4 oil, dirty oil
Starting a new thread about what I posted in the thread below, so as not to hijack the other thread.
https://www.fordbarn.com/forum/showthread.php?t=273067 Post 23 - It "has always bothered me that my oil is so black at 500 miles. Even with rebuilt motor, Berts carb, and decent plug reads". "Have considered changing from Shell T4 to something different, have heard claims that Rotella t4 looks dirty sooner than other oils." Can no longer find the info about T4 running dirty/black. Not sure; if it is because it is a diesel oil, if it requires more frequent changes that other brand/type oils, etc. Would appreciate info/comments. Am I overly concerned about something that is typical for all oils in a Model A Engine without an oil filter? If because of dirty oil at 500 miles you have switched from T4 to another oil please comment including type of oil. Or if you have added an oil filter due to dirty oil at 500 miles please comment. And yes I know some are probably thinking - not another discussion about oil. So please do not let this morph into other oil subjects/areas. I am not looking for info on what is good oil, best oil, additives, etc.. |
11-27-2019, 12:59 PM | #2 |
Senior Member
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
|
Re: Rotella T4 oil, dirty oil
My gut tells me that the dirty black oil isn't specific to Rotella.
I would suggest changing the oil on your modern car at 500 miles and you'll probably find that the oil is also black and seemingly dirty. Oil gets dark very quickly after an oil change but that doesn't mean it's not doing its job. Of course oil will get more dirty more quickly in an A given the lack of air and oil filters on most of them which is why the 500 mile change interval (though I think is too short with modern oils). With a new engine like you have I wouldn't worry much. Do you run an air filter? I can't remember. |
Sponsored Links (Register now to hide all advertisements) |
|
11-27-2019, 01:19 PM | #3 |
Member
Join Date: Jul 2019
Location: Central New Mexico
Posts: 83
|
Re: Rotella T4 oil, dirty oil
The above post is really accurate. Filters make a BIG difference. Especially an air filter.
Concerning T4, or any Diesel specific oil, they are intended to "pick up" soot, which is much more of a problem in diesel engines. So yes, it may appear darker, sooner. I wouldn't sweat it any, we've been running diesel oil in ours for generations. Side thought, I'd rather drain dark oil, than have all that stuff stuck to the engine internals. Disclaimer: this is an opinion, not scientific fact, but based on experience. Sent from my E6810 using Tapatalk |
11-27-2019, 01:37 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Rotella T4 oil, dirty oil
The oil is doing what it is designed to do by holding particulate in suspension so that it doesn't form sludge in the engine. Good filtration helps to clean a lot of this stuff out but it depends on the type of filtration the engine is equipped with.
An engine that has run a while with low or no detergent levels in the oil will get dark quickly from all the sludge build up already in the engine. Engines with carburetors don't run as efficiently as modern fuel injected engines so it's not uncommon for the lubricant to darken with the extra contaminants that come from inefficient combustion and or worn compression rings. Lubricants designed for diesel burning engines generally don't have the same additive package as the lubricants designed for gasoline burners. The oil for diesels have a lot more detergent additives than gasoline burning vehicles. |
11-27-2019, 02:12 PM | #5 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
Another reason for my concern - Last oil change I went 750 miles before changing, and was shocked to see black sticky/a little gooey stuff in the drain plug cavity,. Beginnings of sludge? Don't know. 1st time I have seen it. Do not know if the previous oil change I installed a magnetic oil plug had anything to do with this, but I did not see anything metallic in the plug or in the drain oil. Tried a High Boy/K & N air filter this year for awhile, took it off while dealing with other issues. Trying to get the truck running the way I want it to, then base line MPGs and oil condition/changes. Then add air filter, baseline it again, then perhaps add an oil filter and baseline again. I gave up for awhile, just wanted to enjoy driving the truck for awhile, but plan on getting back to this once I get the brakes sorted out next spring. As you might be able to tell, am retired with too much time on my hands, but am definitely not a mechanic. Nothing is obvious for me when dealing with something the 1st time. |
|
11-27-2019, 02:21 PM | #6 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Sponsored Links (Register now to hide all advertisements)
Quote:
I guess what started a lot of my concern is seeing info/posts that Ars without filters posting they get 800-1000 miles before the oil turning real black (what I consider an india ink black). As I just posted above to Ryan, a second concern is "Another reason for my concern - Last oil change I went 750 miles before changing, and was shocked to see black sticky/a little gooey stuff in the drain plug cavity,. Beginnings of sludge? Don't know. I did not see any sludgy/thick stuff in the drain oil. 1st time I have seen it. Do not know if the previous oil change I installed a magnetic oil plug had anything to do with this, but I did not see anything metallic in the plug or in the drain oil." So should I be concerned about what I found in the drain Plug - or is this typical, not to worry about? |
|
11-27-2019, 02:35 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 2,789
|
Re: Rotella T4 oil, dirty oil
I run Motorcraft 10W30 and change once a year in late-fall before the winter storage, and it is never really very dirty at all.
In fact I probably should take THAT oil and dump it in my everyday car. That wouldn't hurt a darn thing |
11-27-2019, 02:37 PM | #8 | |
Senior Member
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
|
Re: Rotella T4 oil, dirty oil
Quote:
I saved a couple of my 100 mile changes from my new engine and used it in my new car |
|
11-27-2019, 02:40 PM | #9 |
BANNED
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
|
Re: Rotella T4 oil, dirty oil
I use Rotella 15-40 and change it at about 500 miles. I have a K&N air filter but no oil filter. At 500 miles my oil is a little dark but no way black. If I put a drop on my finger I can still see my finger though the oil.
|
11-27-2019, 03:17 PM | #10 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
|
11-27-2019, 03:22 PM | #11 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
When I check mine at 100 miles or so, not much discoloration, looks very fresh, but at 500 is very black. How many miles on your new engine? Mine was rebuilt last winter, but put on over 3000 miles this year. I also changed very frequently the 1st 1000 miles. |
|
11-27-2019, 03:28 PM | #12 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
Do you run an carb balancing modification since you are running an air filter? |
|
11-27-2019, 03:37 PM | #13 | |
Senior Member
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
|
Re: Rotella T4 oil, dirty oil
Quote:
I've got about 1300 miles on it this season. Would have driven more but working on repairing some rotten wood I found. Changed it every 100 miles until it started coming out almost as clean as when it went in. Probably have about 400 miles on this oil change and it still looks new on the dipstick. I'm sure it would look dark if I drain it though. |
|
11-27-2019, 03:47 PM | #14 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Rotella T4 oil, dirty oil
If you're wondering about "dirty" your oil is, just send off a sample for a real analysis. Without seeing/feeling/smelling your oil, no one on this site can give an informed opinion, anyway! Look online for an analysis company, or ask a heavy equipment or truck dealer.
|
11-27-2019, 04:11 PM | #15 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
Thanks, that's a great idea. I vaguely remember seeing it mentioned in the distant past, but had forgotten. Will have to search the Barn and see what comes up. Then go online/google. Issue is I searched on oil subjects, but there is so much of it seems like it would be a weeks reading to get through it all. Next year at oil change hopefully I will remember to save some of the used oil and send it in somewhere. |
|
11-27-2019, 05:11 PM | #16 |
BANNED
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
|
Re: Rotella T4 oil, dirty oil
|
11-27-2019, 05:14 PM | #17 | |
Member
Join Date: Jul 2019
Location: Central New Mexico
Posts: 83
|
Re: Rotella T4 oil, dirty oil
Quote:
Sent from my E6810 using Tapatalk |
|
11-27-2019, 06:18 PM | #18 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Rotella T4 oil, dirty oil
I have explained here before that when I am touring outback with a camper trailer in tow, I judge when to change the oil by watching my instruments.
The engine has oil and air filters, 5.5:1 head, a downdraught Stromberg carburettor from a 1950's Holden and a very mild cam. The middle main bearing is pressure fed at 25 psi. With new oil and travelling at 50 mph and 180 F temp, the oil pressure is 25 psi. Eventually, at the same speed and temperature, the oil pressure starts to drop. The oil has "lost its guts". When the pressure is down to 23 psi, I change the oil and that is quite reliably at 3,500 mile intervals. I use the cheapest 20W50 oil available and ignore the colour of it. Just my experience. BTW, I have done about 40,000 miles on that engine like that so far.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
11-27-2019, 06:49 PM | #19 |
Senior Member
Join Date: Nov 2014
Location: Middlebury,Connecticut
Posts: 100
|
Re: Rotella T4 oil, dirty oil
Your oil is not getting dark because it is the wrong oil. The air and oil filters also have little to do with it. It gets dark because of the incomplete and inefficient combustion of the Model A engine. Unburned fuel and water are the biggest culprits. Your modern car stays cleaner-looking longer because it is much more efficient. Raise the temperature of your engine with a thermostat, use a higher compression head, run leaner and advance your timing as much as you can without preignition will all help you burn your fuel cleaner, however, a Model A engine will never be as efficient and clean as a modern engine. Don,t worry about it, It's normal. Just enjoy your car, and if you don't use an oil filter, Keep changing your oil at 500 miles.
|
11-27-2019, 07:59 PM | #20 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Rotella T4 oil, dirty oil
Quote:
|
|
11-27-2019, 08:07 PM | #21 |
Senior Member
Join Date: May 2010
Posts: 2,789
|
Re: Rotella T4 oil, dirty oil
No. I used to run the Air Maze airfilter on the Tudor but one day it fell off somewhere out on the highway, and the car ran better after that anyway so I never bothered to replace it.
That was on a Tillotson carb, the air inlet opening had scrunched down a bit from the set screw. Naw, a Model A is about the easiest thing to ever change oil on so every 500 miles or end-of-season I change the oil. Never had a problem. |
11-27-2019, 09:03 PM | #22 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
I agree and understand most of this. I do like what you wrote, summarizes things very well. I am trying to understand why some others say there their oil is not a deep black at 500 miles like mine is doing. I do not expect my oil to remain fresh/new looking like a modern car, and do understand the Model A motor is not as efficient and is dirtier. I do not have a high compression head. Decided for my style driving, do not need the extra power. I do not do multi day tours, do not feel the need to run above 45 mph, most enjoyment for me is running 30- 40 mph max. on back roads. I do run a thermostat year round with additional holes drilled in to provide better coolant (Antifreeze) bypass. With Tan cruising/high speed plug reads I assume Carburation is correct, and I do not have to add coolant. I run the GAV at 1/3rd turn open, because at less than that I get a little engine cough at cruising speeds when letting off the gas, and also when shifting. I usually keep my spark advance at least 1/2 down. I adjust it when at cruising/high speed to where the lever is just below (advanced) where further retarding causes reduced motor performance. I retard it a little to avoid possible knock going up longer/steeper hills. It idles well down to 450 rpm at full retard, GAV set just above completely closed. "The air and oil filters also have little to do with it." - Am not sure about this. Would not an oil filter filter out the contaminates in the oil, keeping it looking cleaner longer, and extending the life of the oil? |
|
Sponsored Links (Register now to hide all advertisements) |
|
11-27-2019, 09:37 PM | #23 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,057
|
Re: Rotella T4 oil, dirty oil
So, a couple comments, worth exactly what you paid for them, not more.
Temperature, oil doesn't start to work until it is approx 140 degs f. The symptom of sludge in the bottom sump is an indicator that it is not run long enough at proper temps. The oil filter back in the 50's was found to extend the life of the motor in a full flow system, meaning the oil is filtered and fed directly to the bearings. Yes, it will help but not keep the oil clean. There is a ton of debate on modern oil and synthetics on this forum, personally, I use full synthetic oil. Modern oils are many times better than what was available in the 40's. The only way to diagnose the oil is to have it analyzed for metals and contaminants by a lab. Having several tests done over time will indicate the wear points in the motor. Enjoy your car or pickup, that's why we have them. J
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
11-27-2019, 10:01 PM | #24 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Quote:
Thanks John, really appreciate your comments. - you supplied another piece to the puzzle. See my added comments above. I agree with the other points you made. I just prefer frequent oil changes to keep an eye on how the motor is doing, especially since it was rebuilt last winter. Otherwise would probably go synthetic too. Plus seems you are not supposed to use synthetic on a fresh engine, causes break in issues. You probably are already aware of this. |
|
11-27-2019, 10:26 PM | #25 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,057
|
Re: Rotella T4 oil, dirty oil
30CCPU,
Glad to hear you are open to suggestions, I run a 190 thermostat all the time, even when 100+ degs here in Cali. I am not sure about the babbit being any different than inserted motor, I do hear some talking about washing out the babbit under pressure. Never seen any evidence of it. As for the break in on synthetic, I do not subscribe to that. But, I do not run conventional ring package in these motors, never had a problem. I was working in the lubrication (oil industry) years ago. What sold me on the synthetic oil was the fact that it passed every test the first attempt (API criteria). Conventional oil only had to pass 4 out of 10 attempts, some batches of oil were junked due to failure of cert test. Enjoy your vehicle(s), working on them is half the fun, driving them the other. Happy Thanksgiving, J
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
11-29-2019, 09:54 AM | #26 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
|
Re: Rotella T4 oil, dirty oil
Sponsored Links (Register now to hide all advertisements)
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
11-29-2019, 10:22 AM | #27 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Rotella T4 oil, dirty oil
Thanks eagle, will have to try that on next oil change.
Thanks to all who have posted so far, a lot of great info/ideas. Am open to more. After Searching here previous to 1st post, I was hoping there would be additional info, and there has been a lot of great additional info. Hopefully I can find and up date this post as to results next year. Hope you all U.S. folks had a good Turkey Day. |
11-30-2019, 03:00 AM | #28 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: Rotella T4 oil, dirty oil
Kimlinhn ha described it exactly and correctly. Oil always gets dark because it gets residues from combustion in the cylinder. Every combustion that does not run 1: >1 stoichiometry produces a lot of soot.
You see that well in the back of the black exhaust or if you have started the engine with exhaust end in front of a wall. Soot is oil-soluble, but is only partially filtered out by special filters in the sidestream. This is only available in modern injection engines, as well as the exhaust remains clean. But there are oils that make more or less residue from your own combustion! Transmission oils, ATF, Rhicinous, etc, leave a lot of residue, two-stroke oils very few. It depends on the additivation. Synthetic oils leave very little combustion residue, but they are very hard. Simple mineral oil leaves more combustion residues that are soft for it. Much more important than the type of oil is the regular change to remove the many soot residues out from the motor. These are oils above API "B". A filter retains coarse residue that is sucked in or chipped off hard oil crust. The oil filter prevents wear, but can not really keep an oil "clean". Personally, I would change the oil every 1000 miles / 1 time a year with the filter. Without filters every 500 miles. The few rinsed short distances, the more gerunger is the soot entry.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
11-30-2019, 09:37 AM | #29 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Rotella T4 oil, dirty oil
To add to Werner's post, if you think of oil as a solvent with the calcium based ashless dispersants in there then comparison is similar. A naphtha based solvent starts out almost clear but after you clean a bunch of parts it continues to get darker. All the large particulate is filtered and settled out but it never gets back to a clear fluid. The fine particulate just stays in suspension until you change it out.
Modern cars have government mandated efficiency built onto the fuel delivery systems so they have a much more efficient burn than any of the old carbureted engines could ever attain. The full flow filtration systems are as good as it gets. With all this, the lubricating oil will still stay relatively clean by comparison and therefore last a lot longer. Limitations of modern engine lubricants are more with the plastic polymers that they add in for multi viscosity function. I doubt if they will last much more than 3,500 to 4,000 miles but modern engines have such tight tolerances and run so clean that the oil is still functional for some time after the polymers are worn out. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|