victoria on ebay

[mshmodela]

Looks like a fine project car.... will need at least $15k put into the car (engine rebuild, transmission rebuild, frame off, restore).

[Marco Tahtaras]

Originally Posted by Tiny

I might be inching out on a limb here but couldn't a guy use a tank with a column mount and a dash mount to have the results shown in the Phoenix craigslist add? I don't see the spacer to bring the column down like on Vern's car.

Marco dads car is dated off the frame number as it has been entirely restored down to the bare frame.

Here's a picture pre-restoration

The frame number IS the (original) engine number. That means the number represents when the engine was completed at the Rouge. Then it had to be shipped, warehoused, and eventually installed in a chassis, and only then was the number copied (stamped) to the frame.

Everything I said in my previous post applies here.

[Tiny]

OK I understand what your saying now.
Thanks Marco

[art ebeling]

Thanks to all who responded. I learned a lot. I live in Illinois and there was no easy or economic way to ship the vehicle from Carson City Nevada, I was getting bids around 1300.00 to 1400.00. I will be joining the Victoria Association and checking in with you all at The Ford Barn.

[Mike V. Florida]

Originally Posted by art ebeling

Thanks to all who responded. I learned a lot. I live in Illinois and there was no easy or economic way to ship the vehicle from Carson City Nevada, I was getting bids around 1300.00 to 1400.00. I will be joining the Victoria Association and checking in with you all at The Ford Barn.

You did not try u-ship.

[Mike V. Florida]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by mshmodela

Looks like a fine project car.... will need at least $15k put into the car (engine rebuild, transmission rebuild, frame off, restore).

Only 15K?