The Ford Barn

fins2nv · 03-07-2015, 11:32 AM

All is well with the world again. This morning I did some grinding on the dipstick and it now slips down in the hole as it should, right up to the ring. Of course then I found that the pan was one quart over full so I had to drain some out. Oil is now sitting halfway between low and full on the dipstick. Thanks to everyone for your help. I didn't realize an oil change could be so interesting.

Patrick L. · 03-08-2015, 01:00 PM

Quote:

Originally Posted by fins2nv

All is well with the world again. This morning I did some grinding on the dipstick and it now slips down in the hole as it should, right up to the ring. Of course then I found that the pan was one quart over full so I had to drain some out. Oil is now sitting halfway between low and full on the dipstick. Thanks to everyone for your help. I didn't realize an oil change could be so interesting.

Heck, everything with Model A's is interesting, especially reading this forum.

03-07-2015, 11:32 AM	#21
fins2nv Member Join Date: Aug 2014 Location: Fargo, ND Posts: 73	Re: Oil level All is well with the world again. This morning I did some grinding on the dipstick and it now slips down in the hole as it should, right up to the ring. Of course then I found that the pan was one quart over full so I had to drain some out. Oil is now sitting halfway between low and full on the dipstick. Thanks to everyone for your help. I didn't realize an oil change could be so interesting.