The Ford Barn

Racur96 · 11-21-2012, 04:34 PM

I was looking where the one peice brake cross shaft was introduced and it says the square holes were no longer added to crossmember. Is that referring to the single square hole in the center of top side of crossmember? Mine has a square hole in center and a round hole near frame rail on each side. Thanks

Rowdy · 11-21-2012, 04:54 PM

Sponsored Links (Register now to hide all advertisements)

Although the multiple piece cross member was discontinued in the last half of 1928 The square holes can still be found well into 1929. The holes do not have the indents for the cross shaft pins or the bolt holes for the caps. Rod

11-21-2012, 04:34 PM	#1
Racur96 Senior Member Join Date: Jul 2011 Location: lawrenceburg, tn Posts: 128	Center crossmember I was looking where the one peice brake cross shaft was introduced and it says the square holes were no longer added to crossmember. Is that referring to the single square hole in the center of top side of crossmember? Mine has a square hole in center and a round hole near frame rail on each side. Thanks

11-21-2012, 04:54 PM	#2
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Center crossmember Sponsored Links (Register now to hide all advertisements) Although the multiple piece cross member was discontinued in the last half of 1928 The square holes can still be found well into 1929. The holes do not have the indents for the cross shaft pins or the bolt holes for the caps. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!